topic Re: hatch patterns are always visualized as solid in AutoCAD Forum

hatch patterns are always visualized as solid

ali.bernardeschi — Mon, 29 Aug 2022 09:46:23 GMT

i don't know why but patterns don't work on the model, everytime i choose one it visualizes on the model as solid. I tried many ways to solve the problem, changing the values of hpmaxlines, restarting the programme and even downloading it on another device, but no changes happened. I don't know how to do pls help.

(i have autocad 2023 version)

Re: hatch patterns are always visualized as solid

imadHabash — Mon, 29 Aug 2022 09:54:53 GMT

Hi,

How about changing and modifying the Scale value ?

Re: hatch patterns are always visualized as solid

ali.bernardeschi — Mon, 29 Aug 2022 10:10:26 GMT

first of all, thank you for the answer.

I tried many different values (from 0.1 to 10000) but the problem still persists.

Re: hatch patterns are always visualized as solid

imadHabash — Mon, 29 Aug 2022 10:12:24 GMT

Would you please attache here a CAD dwg sample with that hatch , for testing ?

Re: hatch patterns are always visualized as solid

ali.bernardeschi — Mon, 29 Aug 2022 10:31:35 GMT

sure here it is. thank you.

(i don't know if you can visualize the hatch, i tried to save it but it doesn't appear to me as i re open the file)

Re: hatch patterns are always visualized as solid

Kent1Cooper — Mon, 29 Aug 2022 15:21:20 GMT

@ali.bernardeschi wrote:

.... (i don't know if you can visualize the hatch....)

No, we can't -- there are no Hatch patterns in the drawing. What pattern are you trying to use, and in what area(s)? I am able to call for a non-Solid pattern and have it preview correctly in closed areas.

Re: hatch patterns are always visualized as solid

paullimapa — Mon, 29 Aug 2022 17:37:34 GMT

There was an error so I used the RECOVER command to open the file

Then your UCS is set at a strange orientation so I set that to WORLD

Hatch successful using scale factor of .05 for ANGLE pattern

Re: hatch patterns are always visualized as solid

imadHabash — Mon, 29 Aug 2022 17:57:02 GMT

Thanks for your CAD dwg ..

You have a problem with your UCS icon and general orientation for your drawing .. Your issue will resolved if :

Type in command line UCS command then type W from World option .
Type PLAN command then double enter .

Try now to hatch , any changes ?

Re: hatch patterns are always visualized as solid

Kent1Cooper — Mon, 29 Aug 2022 19:21:33 GMT

@imadHabash wrote:

....

You have a problem with your UCS icon and general orientation for your drawing .. Your issue will resolved if :

Type in command line UCS command then type W from World option .

Type PLAN command then double enter .

....

I don't think that can be it. I simply opened the drawing, and did this Hatch in it [the yellow], without doing anything at all about the Coordinate System or Plan view. After picking a non-Solid pattern in the Hatch ribbon [in this case ANSI32, and at a small scale factor], it previewed correctly when I floated my cursor in that area.

Re: hatch patterns are always visualized as solid

pendean — Mon, 29 Aug 2022 19:48:22 GMT

Thanks for the DWG file @ali.bernardeschi

1) your file opens on a floor plan that is TOO FAR away from 0,0,0

2) your DWG file is in mm units: are you really drawing and dimensioning rooms in millimeters, then fudging the dimensions to show meters?

There are many issues in your file that need addressing.

Re: hatch patterns are always visualized as solid

ali.bernardeschi — Wed, 31 Aug 2022 05:32:28 GMT

Thank you for the answer, I know about the issues but it's my first time using autocad for an uni exam so I'm still learning how it works. I solved by copying all elements into another dwg file to start again and now all hatch patterns work!