topic Re: when line crosses another line autocad attaches them together in AutoCAD Forum

AutoCAD - when line crosses another line autocad attaches them together

hits4200 — Tue, 11 Oct 2022 12:34:16 GMT

for example if i draw a circle and then draw a line from the center of the circle outwards past the edge then autocad connects them together. i cant move them independently of each other. Any help would be appreciated.

[ The subject line of this post has been edited to include the product name by @handjonathan ]

Re: when line crosses another line autocad attaches them together

pendean — Mon, 10 Oct 2022 16:34:56 GMT

Share that DWG file with the line/circle that are permanently attached please, lets see your work for ourselves to try and help you decipher it.

Re: when line crosses another line autocad attaches them together

hits4200 — Mon, 10 Oct 2022 16:41:31 GMT

Thank you Pendean appreciate your time. The circle and the line are not connected but if you select just the line it moves the circle to. Just cant figure this one out.

Re: when line crosses another line autocad attaches them together

RSomppi — Mon, 10 Oct 2022 16:49:02 GMT

I cannot recreate your issue but have you tried setting FSMODE to 0?

Re: when line crosses another line autocad attaches them together

hits4200 — Mon, 10 Oct 2022 18:10:18 GMT

yes, it is off. this is a weird one not doubt.

Re: when line crosses another line autocad attaches them together

pendean — Mon, 10 Oct 2022 18:19:07 GMT

@hits4200 wrote:
yes, it is off. this is a weird one not doubt.

Here is your issue

You need to remove the Parametric Constraints you turned on https://knowledge.autodesk.com/support/autocad/learn-explore/caas/sfdcarticles/sfdcarticles/How-to-turn-off-and-delete-constraints-in-AutoCAD.html

Re: when line crosses another line autocad attaches them together

hits4200 — Mon, 10 Oct 2022 20:16:09 GMT

Thank you so much!!!!!!! constraintinfer value set was set to 1. Put it on 0 and solved the problem.