topic Re: trim command fragmented in AutoCAD Forum

trim command fragmented

jdfnnl — Thu, 16 Feb 2023 06:43:08 GMT

When using the trim command, hitting enter twice for <select all>, the action does not trim lines all the way to the nearest intersecting line and acts as though EDGEMODE is set to 1. However, this is not the case and I am on a search to find out what other variable may be causing this issue. Example file with this problem is attached.

Re: trim command fragmented

Brock_Olly — Thu, 16 Feb 2023 08:02:54 GMT

Is your trim mOde set to 'standard'?

trim > [enter] > O [enter] > S [enter]

Re: trim command fragmented

jdfnnl — Thu, 16 Feb 2023 08:17:08 GMT

AutoCAD 2015 may not have the 'O' option after TRIM?

Re: trim command fragmented

cadffm — Thu, 16 Feb 2023 08:39:01 GMT

@jdfnnl schrieb:

AutoCAD 2015 may not have the 'O' option after TRIM?

You should say your software specs first (for the next time).

>>"When using the trim command, hitting enter twice "

So you type in TRIM and then you hit twice [Enter], the first to confirm "trim" input and start the command,

the second for <selectall>, okay.

I tested without a problem, please doublecheck your edgemode.

Screenshot of one of my tests. Restart Acad and try the same item&clickpoint on your side!

Edgemode 0 works as expected.