topic Re: Help me with the drawing in AutoCAD Forum

Help me with the drawing - AutoCAD 2022

gukuvegetasherif23 — Wed, 03 Sep 2025 15:41:53 GMT

Can anyone tell how can i drew that i know i must use polygon but didn't know what to do after

@gukuvegetasherif23 Your post title was modified to add the product name and version and to increase findability - CGBenner

Re: Help me with the drawing

leeminardi — Wed, 03 Sep 2025 00:39:15 GMT

Post an AutoCAD file of what you are able to do for both constructions.

Re: Help me with the drawing

imadHabash — Wed, 03 Sep 2025 06:40:30 GMT

Hi,

For the left image ...

You can draw it by POLYGON command ... all what you have to do is to change the number of side for every polygon shape starting from 3 till 10 then enter E for Edge option and pick two corners at 10.00.

Command: POLYGON
Enter number of sides <>: 3
Specify center of polygon or [Edge]: E
Specify first endpoint of edge: Specify second endpoint of edge:

For the Right image ...

I'll give you a hint .. you have 6 arrayed objects. Just draw one of the six then use array command ... Let us see your attempts and through them we can help you more.

Re: Help me with the drawing

gukuvegetasherif23 — Wed, 03 Sep 2025 09:29:56 GMT

I used offest 2 between each so i can make same shape but iam kinda lost and how i cam incorporate array to this

Re: Help me with the drawing

imadHabash — Wed, 03 Sep 2025 10:08:14 GMT

Good start ...
The center of circle in my massage #3 is the center of Array(Polar) procedure. You have to trim the object first then use array command from the point that i describe it for you. Keep going your try and get back for any question. >> Click <<

Re: Help me with the drawing

gukuvegetasherif23 — Wed, 03 Sep 2025 10:20:01 GMT

How can i use the rows and columns so i can replacte the shape and where fo i trim

Iam not that experienced in array srry

Re: Help me with the drawing

imadHabash — Wed, 03 Sep 2025 10:33:50 GMT

You have to use Array command with Polar option.. Click on below image

Re: Help me with the drawing

imadHabash — Wed, 03 Sep 2025 10:35:48 GMT

I have attached an illustration image in my previous massage #7 for you.

Re: Help me with the drawing

gukuvegetasherif23 — Wed, 03 Sep 2025 15:37:34 GMT

what about this i did the circle and as u toldi did the polar array with fillit on the circle but i cant seem to know what do in the middle shape and what does angle 45 mean

Re: Help me with the drawing

imadHabash — Wed, 03 Sep 2025 12:28:44 GMT

Good start ...
Just draw the first vertical line ... then fillet it with the circle (0.40) then array it (Num=8) then Mirror all the 8 to get the final needed result.

Re: Help me with the drawing

gukuvegetasherif23 — Wed, 03 Sep 2025 13:00:34 GMT

I did like in the vid and it showed up like this

Re: Help me with the drawing

imadHabash — Wed, 03 Sep 2025 13:17:46 GMT

Make sure that distance=0.60 from the vertical axis is achieved.

Re: Help me with the drawing

gukuvegetasherif23 — Wed, 03 Sep 2025 13:15:08 GMT

My bad i writed the distance wrong

Re: Help me with the drawing

gukuvegetasherif23 — Wed, 03 Sep 2025 13:51:42 GMT

With this i tried everything i tried going from quadrant 2.5 left and line up and fillet didnt work

Re: Help me with the drawing - AutoCAD 2022

shift_enter_inc — Sat, 06 Sep 2025 02:20:36 GMT

Hi! If you want to draw that shape using a polygon, here’s a simple way to start:

Select the polygon tool in your software.
Click to place each vertex of the shape, connecting them in order.
Close the polygon by connecting the last point to the first.
You can then adjust the edges or vertices if needed, depending on your software.

If you tell me which program you’re using, I can give step-by-step instructions for that specific tool.