https://forums.autodesk.com/t5/autocad-forum/dynamic-blocks-not-working/m-p/2802742#M349249 <P>Stretch works a little different than the other actions You have to create a "Stretch Frame" and then select the objects to stretch.&nbsp; I turned on Dynamic Input so you could see the command line at my cursor, but the same prompts are on the command line.</P><P>&nbsp;</P><P>demo</P><P><A target="_blank" rel="nofollow" href="http://screencast.com/t/7PTzaH1d">http://screencast.com/t/7PTzaH1d</A></P><P>&nbsp;</P><P>Good luck.</P> Wed, 20 Oct 2010 19:25:56 GMT nestly 2010-10-20T19:25:56Z https://forums.autodesk.com/t5/autocad-forum/dynamic-blocks-not-working/m-p/2802702#M349248 <P>I have created 3 dynamic blocks. All three are rectangles utilizing the distance parameter. However all three essentially pull apart leaving a gap in the lines making up the rectangle. Can anyone help me figure out what is wrong with the dynamic blocks I have created?</P><P>&nbsp;</P><P>Thanks in advance for your help!</P> Wed, 20 Oct 2010 18:46:17 GMT https://forums.autodesk.com/t5/autocad-forum/dynamic-blocks-not-working/m-p/2802702#M349248 Anonymous 2010-10-20T18:46:17Z https://forums.autodesk.com/t5/autocad-forum/dynamic-blocks-not-working/m-p/2802742#M349249 <P>Stretch works a little different than the other actions You have to create a "Stretch Frame" and then select the objects to stretch.&nbsp; I turned on Dynamic Input so you could see the command line at my cursor, but the same prompts are on the command line.</P><P>&nbsp;</P><P>demo</P><P><A target="_blank" rel="nofollow" href="http://screencast.com/t/7PTzaH1d">http://screencast.com/t/7PTzaH1d</A></P><P>&nbsp;</P><P>Good luck.</P> Wed, 20 Oct 2010 19:25:56 GMT https://forums.autodesk.com/t5/autocad-forum/dynamic-blocks-not-working/m-p/2802742#M349249 nestly 2010-10-20T19:25:56Z