https://forums.autodesk.com/t5/autocad-forum/180-deg-dimension/m-p/2918728#M349099 <P>Is there a way to make a 180 deg arc dimension? It says the lines are parallel - DUH! - and then closes the command.</P> Wed, 16 Feb 2011 17:20:48 GMT Anonymous 2011-02-16T17:20:48Z https://forums.autodesk.com/t5/autocad-forum/180-deg-dimension/m-p/2918728#M349099 <P>Is there a way to make a 180 deg arc dimension? It says the lines are parallel - DUH! - and then closes the command.</P> Wed, 16 Feb 2011 17:20:48 GMT https://forums.autodesk.com/t5/autocad-forum/180-deg-dimension/m-p/2918728#M349099 Anonymous 2011-02-16T17:20:48Z https://forums.autodesk.com/t5/autocad-forum/180-deg-dimension/m-p/2918888#M349100 <P>Just hit "enter" after issuing the command for &lt;select vertex&gt;, then pick the vertex of the angle first and then any point along the two legs of the angle you are trying to dimension.</P> Wed, 16 Feb 2011 18:54:53 GMT https://forums.autodesk.com/t5/autocad-forum/180-deg-dimension/m-p/2918888#M349100 lovecraft 2011-02-16T18:54:53Z https://forums.autodesk.com/t5/autocad-forum/180-deg-dimension/m-p/2919052#M349101 <P>That worked perfectly! Thanks!</P> Wed, 16 Feb 2011 20:26:30 GMT https://forums.autodesk.com/t5/autocad-forum/180-deg-dimension/m-p/2919052#M349101 Anonymous 2011-02-16T20:26:30Z