AS BUILT STAMP Example

tim_crouse — Wed, 21 Jun 2023 03:52:37 GMT

Here is an updated as-built stamp that other folks may find useful.

Best Regards

-Tim C.

Re: AS BUILT STAMP Example

TheCADnoob — Wed, 21 Jun 2023 13:59:40 GMT

Thanks for sharing

Re: AS BUILT STAMP Example

meliza.laderas.polvorosa — Tue, 17 Mar 2026 20:33:52 GMT

Thank you for sharing! Very useful!

Re: AS BUILT STAMP Example

jreidKVSUZ — Wed, 18 Mar 2026 17:28:37 GMT

Tim,

Very nice. Thanks. I remember working at SAIC and we used signed stamps like this. I put all of the engineers stamps into the drawing boarder's XREF, onto their own layers with the engineers Initials and ON for the layer name (STAMP-XXX-ON). When needing them turned off, I would rename the layer to Off (STAMP-XXX-OFF) and save the XREF. That would drive the entire set to turn off the stamp without having to manually do it inside the drawing that takes longer to do and control.

Using Sheet Sets and layers like this turned a (2) person job of editing 50 to 100 pages (4) hours each, down to 20 mins and 1 person. It was a blast working there.

Thanks for sharing!

JRR!

topic Re: AS BUILT STAMP Example in AutoCAD Forum

AS BUILT STAMP Example

Re: AS BUILT STAMP Example

Re: AS BUILT STAMP Example

Re: AS BUILT STAMP Example