https://forums.autodesk.com/t5/autocad-forum/set-default-printer/m-p/6400405#M337034 <P>Hi,</P><P>&nbsp;</P><P>I know this is a very late post, and you probably got sorted, but I had the same problem - saw this post, and since I've just found the cure decided to post it. The problem is with your "page setup".</P><P>&nbsp;</P><P>First you must go to print as normal, you will get that annoying warning about the "none" being selected etc (the original problem)</P><P>Then, in the dialogue box, ADD &nbsp;"Page Name" (top of the dialogue box) Make sure to set everything as you want it, page size, scale etc. etc.</P><P>Then, go ahead and print your drawing.</P><P>&nbsp;</P><P>Now, the trick is, you have to set this PAGE NAME to be the default.</P><P>&nbsp;</P><P>Go to File, scroll down to print, select the arrow for the extended menu options.</P><P>Select "Page Setup"</P><P>Find you newly created PAGE NAME and set it as the default but selecting "Set Current"</P><P>And that's it, you should be able to go straight to that page setup each time you select print, and all you have to do then is select the print area.</P><P>&nbsp;</P><P>Of course, the others gave good advice too, using the "Layouts" is a great way to print lots of individual sheets, but there's a bit to know about that too, if you are doing lots of this type of printing (i.e. lots of sheets) I would strongly recommend that you explore this option.</P><P>&nbsp;</P><P>Denis.</P> Thu, 23 Jun 2016 14:18:14 GMT Anonymous 2016-06-23T14:18:14Z