topic Re: DELETE NAVIGATION CUBE FROM DRAWINGS in AutoCAD Forum

DELETE NAVIGATION CUBE FROM DRAWINGS

Anonymous — Tue, 05 May 2015 19:17:49 GMT

Ever since I had a fatal error in AutoCAD Mechanical 2013, everything was restored all right, the Navigation Cube shows up when I open another drawing. It never showed up before the crash. It does not show up when I first open AutoCAD, just open another drawing.
I have put the following in acad2013doc.lsp: (command "NAVVCUBE" OFF) since it loads with each document. (I also put the same in acad.mnl) It still shows up. I have also put the following in acad2013doc.lsp: (setvar "NAVVCUBEDISPLAY" 0). Neither of these do the trick so I have to turn it off every time I open another drawing.

What am I missing here?

Any ideas

Re: DELETE NAVIGATION CUBE FROM DRAWINGS

Anonymous — Tue, 05 May 2015 19:42:29 GMT

Did you try turning it off in Options? Go to the 3D Modeling tab, bottom left corner, and make sure "Display the View Cube" is unchecked for "2D Wireframe visual styles".

Re: DELETE NAVIGATION CUBE FROM DRAWINGS

Anonymous — Tue, 05 May 2015 20:33:03 GMT

That seems to have worked. Thank you.

JERRY MIDDELSTADT | Design/Drafter - Engineering

Coldspring
17482 Granite West Road | Cold Spring, MN 56320-4578
T: 800.328.5040 | 😧 320.685.4871 | M: 320.267.8883 | F: 320.685.5094
www.coldspringusa.com | jmiddelstadt@coldspringusa.com

This communication is intended only for the recipient(s) named above, may
be confidential and/or legally privileged, and must be treated as such in
accordance with state and federal laws. If you are not the intended
recipient, you are hereby notified that any use of this communication, or
any of its contents, is prohibited. If you have received this
communication in error, please return it to the sender and delete the
message from your computer system.