Slicing.

Anonymous — Thu, 13 Aug 2015 10:12:26 GMT

Slicing.

Hi!

I have question regarding slicing.

I use this tutorial: https://www.youtube.com/watch?v=JGROyrAlGb0

At 3:10 the object is sliced, but I don’t understand how it works.

It would be great if someone could explain this to me.

Thank you in advance.

Pavel

Re: Slicing.

Patchy — Thu, 13 Aug 2015 12:59:02 GMT

Slice, plane XY, coordinate 0,0,8

Keep both? answer Yes and Enter.

Then you get the same thing.

Re: Slicing.

Anonymous — Thu, 13 Aug 2015 13:20:30 GMT

Patchy!

Thank you for your reply!

How do I choose the coordinate?

Thanks.

Re: Slicing.

Patchy — Thu, 13 Aug 2015 13:27:05 GMT

Use ID command and use snap to nearest, then you would have an idea of the Z elevation to slice it at.

So use 0,0, and your Z elevation.

Re: Slicing.

wispoxy — Fri, 14 Aug 2015 03:40:53 GMT

Watch this video:

https://www.youtube.com/watch?v=rZwSFZaNDxA

https://www.youtube.com/watch?v=KqTZPrCScDc

Plus read the following info:

SLICE

Creates new 3D solids and surfaces by slicing, or dividing, existing objects.

Access Methods

Button

Ribbon: Home tabSolid Editing panelSlice

Menu: Modify 3D Operations Slice

Command entry: slice

Summary

The cutting plane is defined with 2 or 3 points, by specifying a major plane of the UCS, or by selecting a surface object (but not a mesh). Either one or both sides of the sliced 3D solids can be retained.

The sliced objects retain the layer and color properties of the original solids. However, the resulting solid or surface objects do not retain a history of the original objects.

Objects that Can Be Used in a Slice Operation

Objects that can be sliced Objects that can be used as cutting planes

3D solids	Surfaces
Surfaces	Circles
	Ellipses
	Circular or elliptical arcs
	2D splines
	3D polyline segments

List of Prompts

The following prompts are displayed.

Objects to slice

Specifies the 3D solid or surface object that you want to slice. If you select a mesh object, you can choose to convert it to a 3D solid or surface before completing the slice operation.

Start point of slicing plane

Sets the first of two points that define the angle of the slicing plane. The slicing plane is perpendicular to the XY plane of the current UCS.

Second point on plane. Sets the second of two points on the slicing plane.
- Point on desired side
- Keep both sides

Planar object

Aligns the cutting plane with a plane that contains a selected circle, ellipse, circular or elliptical arc, 2D spline, or 2D polyline segment.

Select a circle, ellipse, arc, 2D-spline, or 2D-polyline. Specifies the object to use for alignment.

Surface

Aligns the cutting plane with a surface.

Select a surface. Specifies a surface to be used for alignment.
NoteYou cannot select meshes created with the EDGESURF, REVSURF, RULESURF, and TABSURF commands.
- Point on desired side
- Keep both sides

Z axis

Defines the cutting plane by specifying a point on the plane and another point on the Z axis (normal) of the plane.

Specify a point on the section plane. Sets a point on the slicing plane.
Specify a point on the Z-axis (normal) of the plane. Specifies a point that defines the axis that is perpendicular to the slicing plane.

View

Aligns the cutting plane with the current viewport's viewing plane. Specifying a point defines the location of the cutting plane.

Specify a point on the current view plane. Sets a point on the object to start the slice.

Aligns the cutting plane with the XY plane of the current user coordinate system (UCS). Specifying a point defines the location of the cutting plane.

Point on the XY-plane. Sets the location of the slice.

Aligns the cutting plane with the YZ plane of the current UCS. Specifying a point defines the location of the cutting plane.

Point on the YZ-plane. Sets the location of the slice.

Aligns the cutting plane with the ZX plane of the current UCS. Specifying a point defines the location of the cutting plane.

Point on the ZX-plane. Sets the location of the slice.
If a single object is sliced into more than two objects, one solid or surface is created from the objects on one side of the plane and another solid or surface is created from the objects on the other side.

3points

Defines the cutting plane using three points:

First point on plane. Sets the first of three points.
Second point on plane. Sets the second of three points.
Third point on plane. Sets the third of three points.

Point on desired side

Uses a point to determine which side of the sliced solids your drawing retains. The point cannot lie on the cutting plane.

Keep both sides

Retains both sides of the sliced solids. Slicing a single solid into two pieces creates two solids from the pieces on either side of the plane. SLICE never creates more than two new composite solids for each selected solid.

Re: Slicing.

Anonymous — Fri, 14 Aug 2015 12:38:17 GMT

Wisp!

Thank you!

I do appreciate your help!

I will read this

Re: Slicing.

Anonymous — Wed, 05 Oct 2016 19:23:16 GMT

That's great but I'm brand new at this & I haven't got a clue what your saying.

Re: Slicing.

Anonymous — Wed, 05 Oct 2016 19:26:30 GMT

That video's not any good at all. I can't see it cause it's to small. the font is to small to see.

topic Re: Slicing. in AutoCAD Forum

Slicing.

Re: Slicing.

Re: Slicing.

Re: Slicing.

Re: Slicing.

Re: Slicing.

Re: Slicing.

Re: Slicing.