https://forums.autodesk.com/t5/autocad-forum/create-custom-hatch/m-p/11772177#M311916 <P>When you have made a block of the pattern you want to hatch, you can go to "Express tools" at the top of your screen, then go to super hatch. There you can select your own block, and make it into a hacth, you'll have to set the scale first, but if your original block was the right scale, than just type 1 for both the x and the y scale. Then it'll ask you to select the area, after which you can use your pattern as an hatch. Its quite simple and very usefull, hope this helps.</P> Wed, 22 Feb 2023 08:38:36 GMT o_van_ooster 2023-02-22T08:38:36Z