topic Re: 3D DWF Export in AutoCAD Forum

topic Re: 3D DWF Export in AutoCAD Forum https://forums.autodesk.com/t5/autocad-forum/3d-dwf-export/m-p/5865967#M307098 Alfred:Thanks again for your continued support! >> Which object types?Most of the objects are 3D Solids. >> Be careful about the points within blocks as the point-display size set in the PTYPE dialog might be scaled with the block scale factor. I have tried a variety of PDSIZE and PDMODE  values. During these attempts, the points in all the various setting combos do not display as expected. Also, PDMODE = 0 (as a point) will not display in the 3D DWF. Is there a way to display the point in a 3DDWF? >> I don't see any bolts in your screenshot. I have added two screen shots to compare. The dwg shows the bolts and steel as expected, whille the 3DDWF shows distorted model objects. What would cause the bolts and modeled steel to distort? >> if you get the same display issue with a small sample then upload a small sample with a few points and bolts so we can play with it. I do not get a better result for the smaller model. I have added a smaller model for your consideration. Daniel Sat, 17 Oct 2015 10:54:25 GMT Anonymous 2015-10-17T10:54:25Z