topic Re: Problem units when i insert a layout from template in AutoCAD Forum

Problem units when i insert a layout from template

Anonymous — Wed, 09 Dec 2015 18:00:24 GMT

I have created a template whit the sheetborder and some bloccks whit attibutes, and use like a template, everything was created in metric units

So, i was working whit Autocad 2014, and everything was okay, recently installed Autocad 2015 and i had problems whit the units when i insert the layout template in a new file.

these are the steps I follow to insert the layout template into a new drawing

I try using the command 'Dwgunits whit this configuration,

but i cant do this and need Each drawing a definitive solution I think it is due to a conflict in the units of the new drawing, but can not find the cause much less the solution , who can help me thanks.

Re: Problem units when i insert a layout from template

jackshield — Wed, 09 Dec 2015 18:06:40 GMT

look at

insunitsdeftarget

insunitsdefsource

Re: Problem units when i insert a layout from template

Anonymous — Wed, 09 Dec 2015 18:35:11 GMT

they are in the same value

insunitsdeftarget 6

insunitsdefsource 6

are the same

@Anonymous wrote:
look at
insunitsdeftarget
insunitsdefsource

Re: Problem units when i insert a layout from template

dmfrazier — Wed, 09 Dec 2015 21:36:07 GMT

See if this helps:

https://knowledge.autodesk.com/support/autocad/learn-explore/caas/CloudHelp/cloudhelp/2015/ENU/3PP-ACD-Wiley/files/GUID-56DE3DFC-CC31-48FC-83CC-344B230EB1F1-htm.html?v=2015

Re: Problem units when i insert a layout from template

Anonymous — Thu, 10 Dec 2015 12:43:33 GMT

Hi, i used at the beginning like show in the second image i think, but dont work, thank you anymway 😄