topic Dot.: Isometric Drawing in AutoCAD Forum

Isometric Drawing

Anonymous — Fri, 22 Jan 2016 10:13:29 GMT

How can i setup Drawing objects(Floor Plan) properly and start an Isometric Drawing to draw Pipes?

Dot.: Isometric Drawing

Slawomir_ — Fri, 22 Jan 2016 14:20:46 GMT

Perhaps creating new drawing from "acadiso3D.dwt" will solve Your question. Hint: turn on Ortho mode by pressing F8. Open AutoCAD and follow three steps shown on picture below.

Dot.: Isometric Drawing

Slawomir_ — Fri, 22 Jan 2016 16:19:59 GMT

Sorry for lack of picture. I don't know why I forgot to attach it. Steps to create new drawing: 1. Click on upper left corner of AutoCAD 2. Click "New" 3. Choose "acadiso3D.dwt" End 🙂

Dot.: Isometric Drawing

drjohn — Fri, 22 Jan 2016 19:48:03 GMT

You can start by (in modelspace) typing SNAP > S > and select I for ISO mode. (Do the opposite to get back to ortho mode)

While you are drawing you can press F5 to toggle between TOP, LEFT, RIGHT.

You might also want to hit F9 to turn off snap.

HTH

Regards,