topic Re: Line Type Control in AutoCAD Forum

Line Type Control

Anonymous — Sat, 23 Apr 2016 21:49:44 GMT

Hi,

In model space my 1/4" drawing shows demolition as dotted lines but in paper space they are solid.

Help....Jim

Re: Line Type Control

Pointdump — Sun, 24 Apr 2016 00:28:20 GMT

Jim,

Try PSLTSCALE = 1

Oh, and welcome to the Forum!

Dave

Re: Line Type Control

imadHabash — Sun, 24 Apr 2016 05:28:51 GMT

Hi and welcome to Autodesk Forum,

Go inside the viewport first then type PSLTSCALE and change the value then REGEN .

then you will get what you need.

Good Luck..

Re: Line Type Control

Emmsleys — Mon, 25 Apr 2016 21:31:11 GMT

@Anonymous

Adding to this thread;

If the AutoCAD release your are working on is older than 2008 please provide that information.

If so I would recommend taking a look at this thread.

Below are system variables you should check out;

PSLTSCALE needs to be set in an active Vieport.
MSLTSCALE

Re: Line Type Control

Emmsleys — Sat, 30 Apr 2016 19:05:58 GMT

Hi @Anonymous

Following up on this thread, I haven't heard back if you were able to try the suggested steps.

Please post back in the thread if you are still having an issue with AutoCAD the community and myself will be more than happy to help.