topic Betreff: 2D SECTION FROM 3D MODEL in AutoCAD Forum

2D SECTION FROM 3D MODEL

hamish.maclean — Wed, 29 Jun 2016 10:03:54 GMT

New to this so excuse my ignorance,

I have a large 3d model of which I want to drop a few 2d views to create layouts. at different levels.

I have used create a section with volume and made a block while in hidden line mode.

The section however does not remove hidden lines, they are broken in the right places but still there

I have set hidden lines not to show in visual styles but it does not help.

Is there something I am doing wrong or an easier way to produce floor layouts.

Betreff: 2D SECTION FROM 3D MODEL

Sofia.Xanthopoulou — Wed, 29 Jun 2016 15:10:57 GMT

Hi @hamish.maclean,

and welcome to the community

Type the command " viewbase "

This will allow you to create 2D views from your 3D Model in the layout where you can annotate it.

Is this what you were looking for?

Regards

-----------------------------
Please accept as solution if my post fully resolves your issue, or reply with additional details if the problem persists.

Betreff: 2D SECTION FROM 3D MODEL

hamish.maclean — Fri, 01 Jul 2016 11:00:11 GMT

Hi Sofia

Thanks for the help, unfortunately "viewbase" while appearing to be a great tool does not quite give me what I want.

I need a several sectional plan views (with hidden lines removed) through 5m deep sections of my model, which I can then modify, add to and annotate.

As I mentioned "Section Plane_volume" seems to be ideal except the hidden lines are not being removed when the block is generated and I have to manually remove them....

Thanks again for the suggestion though.

Betreff: 2D SECTION FROM 3D MODEL

Alfred.NESWADBA — Fri, 01 Jul 2016 11:44:38 GMT

Hi,

>> does not quite give me what I want.I need a several

>> sectional plan views (with hidden lines removed) through 5m deep sections

Maybe I don't see your real needs, but that sections are done within a couple of minutes (and stay associative to the original 3D object).

What are you missing here?

- alfred -

Betreff: 2D SECTION FROM 3D MODEL

Sofia.Xanthopoulou — Tue, 05 Jul 2016 09:19:30 GMT

Hi @hamish.maclean,

are you sure Alfred's and my suggestion is not the right tool for you? Or do you want to do something else?

Please complete this conversation with your feedback so all readers can benefit from the results of this thread.

Thank you

Betreff: 2D SECTION FROM 3D MODEL

hamish.maclean — Tue, 05 Jul 2016 11:03:08 GMT

Hi Sofia

Apologies for my late reply..

Thanks to you and Alfred for your help, I think my problem is I need to spend more time playing with the settings in the section plane command and with viewbase to see what they can do. I am learning on the job and rushing things a bit, I will look for some tutorials or a course. but what your advice has given me is enough to get me started.

thanks again.

Hamish

Betreff: 2D SECTION FROM 3D MODEL

Sofia.Xanthopoulou — Tue, 05 Jul 2016 11:16:29 GMT

No problem Hamish,

we just want to make sure that you get what you need to be able to work properly.

And to have a closure here, please mark one/more posts as accepted solutions, so that other readers can benefit from your experience, too.

Thanks a lot

Looking forward to your next thread