topic Re: Panning with Logitech M560 Mouse in AutoCAD Forum

Panning with Logitech M560 Mouse

Anonymous — Mon, 11 Jul 2016 14:03:20 GMT

Whenever I use the middle button to pan, it switches between open tabs. For example, If I have a file open and the Start Tab is beside it, when I click and hold the middle button to pan in my file, it switches to the Start Tab. I am using a Logitech M560 Mouse. Before you ask, Yes, I did download the appropriate mouse software and programmed the middle button to be used in this fashion. I was using the function fine for several weeks up until this morning when I opened AutoCAD and this issue started. I am using AutoCAD 2017 Student.

Re: Panning with Logitech M560 Mouse

TheCADnoob — Mon, 11 Jul 2016 14:09:27 GMT

what is the value of MBUTTONPAN?

Re: Panning with Logitech M560 Mouse

Anonymous — Mon, 11 Jul 2016 14:10:48 GMT

MBUTTONPAN = 1

Re: Panning with Logitech M560 Mouse

TheCADnoob — Mon, 11 Jul 2016 14:23:07 GMT

Give this a gander and see if it helps

https://knowledge.autodesk.com/support/autocad/troubleshooting/caas/sfdcarticles/sfdcarticles/Wheel-button-on-mouse-does-not-perform-zoom-functions.html

Re: Panning with Logitech M560 Mouse

TheCADnoob — Mon, 11 Jul 2016 14:26:18 GMT

I might also double check the button assignments in the driver utility. Sometimes i have better luck with generic windows drivers with some peripherals so you can also try uninstalling the driver as well.

Re: Panning with Logitech M560 Mouse

Anonymous — Mon, 11 Jul 2016 14:34:11 GMT

Thank you! This worked - at least for now.

Re: Panning with Logitech M560 Mouse

TheCADnoob — Mon, 11 Jul 2016 14:39:49 GMT

glad to have helped- at least for now hehe

Re: Panning with Logitech M560 Mouse

Anonymous — Mon, 11 Jul 2016 15:36:36 GMT

Unfortunately this was only a temporary fix. It is no longer working. I have no idea how that makes any sense - how it could work for a while then stop working again without me changing any settings is baffling.

Re: Panning with Logitech M560 Mouse

TheCADnoob — Mon, 11 Jul 2016 15:50:32 GMT

did the values in your CUI change?

Re: Panning with Logitech M560 Mouse

Anonymous — Mon, 11 Jul 2016 15:53:55 GMT

No, they did not change. After I changed them as it told me to, the CUI value remained the same after I closed the CUI window. I even re-opened it to check and made sure that I had hit "Apply" before closing.

Re: Panning with Logitech M560 Mouse

TheCADnoob — Mon, 11 Jul 2016 16:03:52 GMT

have you checked logitech forums?

https://forums.logitech.com/t5/Mice-and-Pointing-Devices/M560-middle-button-application-specific/td-p/1167153

Re: Panning with Logitech M560 Mouse

Anonymous — Mon, 11 Jul 2016 16:10:30 GMT

So essentially it is saying that the mouse may actually be the problem, not CAD itself. That makes sense I suppose, but it is just strange that it would work flawlessly for several weeks and then suddenly stop working. I can always buy another wireless mouse to use for CAD and see if that makes a difference. Thank you so much for your help, hopefully that will solve my problem.

Re: Panning with Logitech M560 Mouse

TheCADnoob — Mon, 11 Jul 2016 17:52:49 GMT

Im about to murder my M570 cause of a bad button so its not beyond the scope of possibilities that its the mouse. it does sound like an odd problem though. Does it functional as it should in other programs?

Re: Panning with Logitech M560 Mouse

RobDraw — Mon, 11 Jul 2016 17:57:35 GMT

The Logitech SetPoint software has created problems for me in the past. When not installed, no issues.

Re: Panning with Logitech M560 Mouse

Anonymous — Mon, 19 Sep 2016 21:21:13 GMT

This problem occurs when you use some models of Logitech® mouse [like my M560], that changes the regular escrow to smoot mode when you press the wheel.
The way I find to solve it in Revit® and CAD® was use the command “PAN” at the keyboard, and them use the left bouton to pan. Otherwise, I use also my old M280 mouse in such programs, due it don´t have the dual mode wheel.
There is the only way to solve your problem. That´s all my friend. Thanks TOM.

@Anonymous wrote:
Whenever I use the middle button to pan, it switches between open tabs. For example, If I have a file open and the Start Tab is beside it, when I click and hold the middle button to pan in my file, it switches to the Start Tab. I am using a Logitech M560 Mouse. Before you ask, Yes, I did download the appropriate mouse software and programmed the middle button to be used in this fashion. I was using the function fine for several weeks up until this morning when I opened AutoCAD and this issue started. I am using AutoCAD 2017 Student.

Re: Panning with Logitech M560 Mouse

RobDraw — Tue, 20 Sep 2016 11:05:44 GMT

@Anonymous wrote:

There is the only way to solve your problem.

Not true. Other solutions and possible causes were given.