topic Re: Orbit command problem in AutoCAD Forum

Orbit command problem

jfte3d — Sun, 20 Nov 2016 23:03:16 GMT

Using Orbit Command, in parallel mode, all objects disapears when zoom in or out with the mouse. Switching to perspective mode, all objects are back...this problem is new whit the latest Autocad 2017 sp.

Re: Orbit command problem

Alfred.NESWADBA — Sun, 20 Nov 2016 23:34:49 GMT

Hi,

>> whit the latest Autocad 2017 sp.

What is your latest service pack? Start command _ABOUT and show us the screenshot so we can see which update you have installed.

For me command _ORBIT works, I have activated the hardware acceleration and tried now with the basic visual style "2D Wireframe" as well as "Conceptual" ==> what environment have you had for testing? And did you test the same with a new drawing, just one box and start the command?

- alfred -

Re: Orbit command problem

jfte3d — Sun, 20 Nov 2016 23:44:31 GMT

Thank you Alfred for your time, Yes I tried new drawing as well as existant file...Hardware turned on with all option, turned off. I have a Zbook Studio with a certified card Quadro M1000...It is only when zooming that I lost the objects. Noticed that the target Z goes really far..tried also to enable the auto target (which was create a fatal error in the past). I will try to investigate my mouse wheel...Aslo tried zoomfactor set to 10, 60..Been using Autocad for 20 years, first time I see this.

Re: Orbit command problem

jfte3d — Mon, 21 Nov 2016 00:15:21 GMT

The version I have is 2017.1.1 Update.

This problem came with the 2017.1, released 1 month ago

Re: Orbit command problem

Alfred.NESWADBA — Mon, 21 Nov 2016 07:28:29 GMT

Hi,

I can't reproduce that issue, at least how I understand it ... what am I doing different?

Can you show what happens on your screen (e.g. using free Autodesk Screencast >>>click<<<)

- alfred -

Re: Orbit command problem

jfte3d — Mon, 21 Nov 2016 13:43:52 GMT

Hello, I recorded a Screen cast to show you my issue

thanks again for helping me.

http://autode.sk/2guMwwN

Re: Orbit command problem

Alfred.NESWADBA — Mon, 21 Nov 2016 13:49:04 GMT

Hi,

look to your target-Z when you scroll, that's where you have to start investigating about your scene.

- alfred -

Re: Orbit command problem

jfte3d — Tue, 22 Nov 2016 13:08:21 GMT

Thank's again Alfred, there must be something with that Z target...Couldn't find any solution...I will continue to investigate. I will try another mouse, just in case.