topic Re: AutoCAD 2017 doesnt save to 2010 in AutoCAD Forum

AutoCAD 2017 doesnt save to 2010

Anonymous — Thu, 26 Jan 2017 14:20:10 GMT

I added a rev cloud and a rectangle to a drawing and the file will not save down to 2010, incompatible entities. I saved the file to 2013 and then down to 2010. Is there a setting or a fix for this?

Re: AutoCAD 2017 doesnt save to 2010

Alfred.NESWADBA — Thu, 26 Jan 2017 14:41:39 GMT

Hi,

welcome @Anonymous.autodesk.com!

>> and the file will not save down to 2010, incompatible entities

I'm using AutoCAD 2017 Update 1.1 ... and yes, I get a message with a warning (see screenshot), but I can save the drawing including a pointcloud-reference back to DWG-2010 format.

The message I get is that:

So first verify that your AutoCAD 2017 is updated to "Update 1.1".

What reason do you have to save the drawing back to DWG-2010 format (as the point-cloud can't be used then)?

- alfred -

Re: AutoCAD 2017 doesnt save to 2010

rkmcswain — Thu, 26 Jan 2017 14:51:58 GMT

Using vanilla AutoCAD, or a vertical?

I just created a revcloud and rectangle in AutoCAD 2017, and saved it down to 2010 DWG version (you mentioned 2013, which is the same DWG format used in AutoCAD 2017).

Anyway, the 2010 drawing works fine when opened in an earlier version.

Re: AutoCAD 2017 doesnt save to 2010

rkmcswain — Thu, 26 Jan 2017 14:53:45 GMT

@Alfred.NESWADBA - there is no point cloud involved here.

Re: AutoCAD 2017 doesnt save to 2010

Anonymous — Thu, 26 Jan 2017 14:55:57 GMT

Client uses Acad 2012 so must save down to 2010.

Re: AutoCAD 2017 doesnt save to 2010

Alfred.NESWADBA — Thu, 26 Jan 2017 14:57:30 GMT

Hi,

@rkmcswain

>> there is no point cloud involved here.

Thank you for the note, seems I need some sleep 😉

Sorry for confusion!

- alfred -

Re: AutoCAD 2017 doesnt save to 2010

rkmcswain — Thu, 26 Jan 2017 14:58:48 GMT

@Anonymous - see attached. 2010 version DWG with revcloud and rectangle.

Re: AutoCAD 2017 doesnt save to 2010

Alfred.NESWADBA — Thu, 26 Jan 2017 15:01:26 GMT

Hi,

the hint - looking to the current service pack/update of your AutoCAD - is still valid 😉

- alfred -

Re: AutoCAD 2017 doesnt save to 2010

Anonymous — Thu, 26 Jan 2017 15:05:37 GMT

I will check this out and let you know how I make out.

Thanks

Re: AutoCAD 2017 doesnt save to 2010

RobDraw — Thu, 26 Jan 2017 15:51:59 GMT

To avoid getting that message and the one that is similar when opening the saved down file, you need to export the file. In vanilla AutoCAD, I believe the correct syntax is "-EXPORTTOCAD". This will convert these newer features that the older versions don't recognize to something compatible.

Re: AutoCAD 2017 doesnt save to 2010

pendean — Thu, 26 Jan 2017 17:43:29 GMT

Do NOT use SAVEAS command to knock the file down.
Click on the big red A at the top left.
Select the saveas menu, select the DWG CONVERT option
Select the CONVERT TO 2010 option, then add your file to this pop-up.

This is how you properly convert a file to R2010 without any content in 2017 interfering.

Re: AutoCAD 2017 doesnt save to 2010

Anonymous — Fri, 27 Jan 2017 12:30:35 GMT

Thanks for your tip, it works.

Yours,

Colette Agabiti
Electrical Design
Electric Power Systems
D 1-609-720-3355
colette.agabiti@aecom.com

AECOM
510 Carnegie Center, Princeton, NJ 08540
T 609-720-2000 F 609-720-3565
www.aecom.com