topic Re: COUNTLIST: exclamation marks in AutoCAD Forum

COUNTLIST: exclamation marks

serge — Thu, 14 Dec 2023 13:46:50 GMT

How can I devisualize the exclamation marks in the COUNT Palette?
(see: Attachment)
Thank you

Re: COUNTLIST: exclamation marks

pendean — Thu, 14 Dec 2023 14:27:04 GMT

Click on those items and find out what the issue maybe: you cannot "hide" them but you can just ignore them instead.

Re: COUNTLIST: exclamation marks

serge — Thu, 14 Dec 2023 14:52:53 GMT

Thanks.
That's rather regrettable,
suppose I want to deliver this drawing to a client?
especially the 'Renamed Block'-warning is tricky and consfusing, also nasty to avoid or remove.
There should be a sysvar to surppress these warnings?

Re: COUNTLIST: exclamation marks

pendean — Thu, 14 Dec 2023 15:20:17 GMT

@serge wrote:

Thanks.
That's rather regrettable,
suppose I want to deliver this drawing to a client?
especially the 'Renamed Block'-warning is tricky and consfusing, also nasty to avoid or remove.
There should be a sysvar to surppress these warnings?

Communicate with your recipients.

If that's too disturbing, then you'll need to avoid those traps that trigger those types or alerts: AutoCAD is what it is sadly. We as end users don't get to add "should be" anything in the program, but you can ask for it in future versions of the program here https://www.autodesk.com/company/contact-us/product-feedback

Re: COUNTLIST: exclamation marks

cadffm — Thu, 14 Dec 2023 15:38:53 GMT

Hi,

>>"That's rather regrettable"

The answer was wrong, but also if you couldn't change it: Why is regrettable?

>>"suppose I want to deliver this drawing to a client?"

Why? The dialog is showing what it is designed for and it showing the truth.

>>"especially the 'Renamed Block'-warning is tricky and consfusing"

Yes it is, but it has nothing to do with a mistake in your File (can be an mistake, but must not),

it is a feature in your program and if the client uses the same program, he have to know how to use and interprete the results.

>>"There should be a sysvar to surppress these warnings?"

This is a check-feature and you (in your program) can setup the check to what the check should do!

And that's the point: YOU can turn off the renamed and exploded message.. .

but this is not stored in your file!

If your client don't want it, he has to set up the program himself.

What you are searching is COUNTCHECK

https://help.autodesk.com/view/ACD/2024/ENU/?guid=GUID-115D0192-FD3A-4420-B52D-1E8351D115F5