topic Re: Global scale factor and current objekt scale? in AutoCAD Forum

Global scale factor and current objekt scale?

per_anders — Wed, 22 Feb 2017 09:22:24 GMT

Why do not I see the lines as they should be in the model, but only in Layout?

I do not understand what the difference is between the global and the current, just know that it changes when you use the command Ltscale.

Re: Global scale factor and current objekt scale?

imadHabash — Wed, 22 Feb 2017 09:46:39 GMT

Hi,

>> I do not understand what the difference is between the global and the current <<

I suggest to read this AKN Here,that it may give some help.

>> Why do not I see the lines as they should be in the model <<

you may need to load your linetypes from Acadiso.lin -see attached image- make sure that you select your needed linetypes.your CAD elements must be fine as much as you need in Model space because it's the reference for Layouts VP.

Regards,

Re: Global scale factor and current objekt scale?

per_anders — Wed, 22 Feb 2017 10:48:21 GMT

Hey!
Having done that you described, but the lines of the model are the same (solid lines) Sorry.

Mvh

Per-Anders

Re: Global scale factor and current objekt scale?

imadHabash — Wed, 22 Feb 2017 10:53:04 GMT

would you please attache some of these solid lines as CAD file?

Re: Global scale factor and current objekt scale?

per_anders — Wed, 22 Feb 2017 12:09:39 GMT

zip file with my drawing.

Mvh

Per-Anders

Re: Global scale factor and current objekt scale?

Vinayv4v — Wed, 22 Feb 2017 12:51:12 GMT

Hi,

Global scale factor is the overall scale of all objects (command-LTS) which will change the line type scales of all objects. As per your drawing, in model space you can see your objects as in the layout if you set lts around 20-28. Current object scale is the line type scale of a particular object (ie you can define different line type scales to different objects). But in layout it will be according to the paper size you set. Check the 2nd figure.

Thanks & Best Regards