topic Re: Dynamic Input & Polylines in AutoCAD Forum

Dynamic Input & Polylines

lgentileZY46F — Sun, 21 Jan 2024 22:51:39 GMT

It seems that a setting of mine had changed with the Dynamic Input display when drawing polylines.

Typically, I would use my polyline command, in conjunction with dynamic input to "measure" the distance in between lines. In the example below, I first clicked on the foundation wall and then hovered over the edge of the pavement to the south.

I would expect to see 24, but I'm seeing 3.7

Re: Dynamic Input & Polylines

ennujozlagam — Mon, 22 Jan 2024 06:34:10 GMT

https://www.autodesk.com/support/technical/article/caas/sfdcarticles/sfdcarticles/new-dimension-shows-the-wrong-value-in-autocad.html

Re: Dynamic Input & Polylines

vinodkl — Mon, 22 Jan 2024 07:01:48 GMT

Hello @lgentileZY46F

Please type in the command "_.DYNMODE" and set it to "3" and see if that helps.