topic Re: How to do a cutline in AutoCAD Forum

How to do a cutline

Anonymous — Wed, 20 Sep 2017 17:25:57 GMT

I have a wall that continues but I don't want to show the complete wall so I would like to use cutline but don't know how to. Can some help !

Re: How to do a cutline

Anonymous — Wed, 20 Sep 2017 17:29:14 GMT

You can use the "breakline" command. The size of the breakline is control by the dimscale factor.

Re: How to do a cutline

Alfred.NESWADBA — Wed, 20 Sep 2017 17:31:46 GMT

Hi,

not sure to understand the question correctly. You have long wall which does not fit to a plot-format, so you want to plot the start of the wall and the end of the wall, but not the complete length on the plot .... if so, then create two viewports, each showing one end of the wall.

If I'm wrong, then please describe your question a bit more detailed, maybe with a drawing that shows your situation.

- alfred -

Re: How to do a cutline

john.vellek — Wed, 20 Sep 2017 18:09:13 GMT

Hi @Anonymous,

I see that you are visiting as a new member to the AutoCAD forum. Welcome to the Autodesk Community!

I made a quick video to show Alfred's great suggestion. To take it further, you could use the breakline as described by @Anonymous to show that it is broken.

Please select the Accept as Solution button if my post solves your issue or answers your question.

Re: How to do a cutline

imadHabash — Wed, 20 Sep 2017 18:28:35 GMT

Hi,

use Breakline command and try to get this result.

Regards,

Re: How to do a cutline

john.vellek — Thu, 21 Sep 2017 21:49:18 GMT

Hi @Anonymous,

I am checking back to see if my post or others helped you with your problem. Please mark a post or posts as accepted solutions if they resolved the issue or give me a bit more detail on this issue so we can continue to work towards getting this solved.

Please hit the Accept as Solution button if a post or posts solves your issue or answers your question.

Re: How to do a cutline

aadish_bin_abdul_sathar — Tue, 22 Oct 2024 09:21:38 GMT

thank you 🙂

Re: How to do a cutline

aadish_bin_abdul_sathar — Tue, 22 Oct 2024 09:21:46 GMT

ty 🙂