topic Re: First click doesn't work for line, copy, move in AutoCAD Forum

First click doesn't work for line, copy, move

Anonymous — Wed, 04 Oct 2017 04:17:59 GMT

First click doesn't work for line, copy, move..Pickfirst is set to 1. Can any of you suggest a solution please?

Re: First click doesn't work for line, copy, move

ennujozlagam — Wed, 04 Oct 2017 04:31:20 GMT

PICKADD set to 1

Re: First click doesn't work for line, copy, move

Vinayv4v — Wed, 04 Oct 2017 05:02:18 GMT

Hi,

Is this behaviour same in all your drawings.

If PICK Variables doesn't help try resetting autocad to defaults.

https://knowledge.autodesk.com/support/autocad/troubleshooting/caas/sfdcarticles/sfdcarticles/How-to-reset-AutoCAD-to-defaults.html

Re: First click doesn't work for line, copy, move

imadHabash — Wed, 04 Oct 2017 05:15:18 GMT

Hi,

>> First click doesn't work for line, copy, move <<

first click for a line command is completely different from copy and move commands ... would you please describe more your issue ?

Regards,

Re: First click doesn't work for line, copy, move

Anonymous — Wed, 04 Oct 2017 12:28:47 GMT

I think this was part of the issue... Where is the setting that controls the selection of objects? As of right now I have to select the object first then invoke a command. I want vice versa

Re: First click doesn't work for line, copy, move

Anonymous — Wed, 04 Oct 2017 12:31:37 GMT

Pickfirst is set to 1

Re: First click doesn't work for line, copy, move

Vinayv4v — Wed, 04 Oct 2017 12:37:45 GMT

Hello,

The pickfirst Variable in Options (Op).

0 = Off. You can select objects only after you start a command

1 = On. You can also select objects before you start a command

Re: First click doesn't work for line, copy, move

Anonymous — Wed, 04 Oct 2017 13:08:19 GMT

Thanks for this. This all was checked.

Re: First click doesn't work for line, copy, move

Anonymous — Wed, 04 Oct 2017 13:09:20 GMT

All settings were reset to default

Re: First click doesn't work for line, copy, move

Kent1Cooper — Wed, 04 Oct 2017 16:08:34 GMT

@Anonymous wrote:

.... Where is the setting that controls the selection of objects? As of right now I have to select the object first then invoke a command. I want vice versa

I can understand that in relation to Copy and Move [the PICKFIRST System Variable as others have already noted], but what does it have to do with the LINE command included in Post 1?

Re: First click doesn't work for line, copy, move

pendean — Wed, 04 Oct 2017 16:33:03 GMT

This happens ALL the time, or only occasionally?
What is your AutoCAD version and variant?
What add-ons do you have running?
Windows OS is what?
Is this a sudden problem today, and it's everywhere?
Running in two monitors, and you launch commands from one monitor but draw on the second?
Get a new mouse or updated mouse driver recently?

You are describing a Loss-Of-Focus in regards to the program window, your mouse thinks some other program window is active, and why you have to click once to activate the window and once again to use a command.

Re: First click doesn't work for line, copy, move

Anonymous — Wed, 07 Feb 2018 03:17:30 GMT

It looks like hardware is causing this. I installed this on another machine and all seems fine. What specifically could be causing this?

Re: First click doesn't work for line, copy, move

Vinayv4v — Wed, 07 Feb 2018 04:51:12 GMT

Hi,

Are you using the move & copy commands from the ribbon tool bar?

Check your QAFLAGS variable. Is it 0 or 1. The default value is 0.

If it is 1 then make it 0 and check if the commands are working.

Re: First click doesn't work for line, copy, move

Anonymous — Wed, 07 Feb 2018 05:08:37 GMT

it's set to 0...I use both...this didn't help

Re: First click doesn't work for line, copy, move

Anonymous — Wed, 07 Feb 2018 16:11:24 GMT

Basically, I need to press the mouse button at least three times to activate the command...extremely annoying.. any ideas gents?

Re: First click doesn't work for line, copy, move

Kent1Cooper — Wed, 07 Feb 2018 16:54:17 GMT

@Anonymous wrote:

Basically, I need to press the mouse button at least three times to activate the command...extremely annoying.. any ideas gents?

Faulty mouse button?

Re: First click doesn't work for line, copy, move

Anonymous — Wed, 07 Feb 2018 16:57:43 GMT

nope..I tried different mouse..but thank you for suggestion.

Re: First click doesn't work for line, copy, move

Anonymous — Wed, 07 Feb 2018 17:10:23 GMT

All updates and service packs are up to date on both software's as well as Windows 7 Pro. Drivers are also up to date. I have no clue...Any help will be greatly appreciated.

Re: First click doesn't work for line, copy, move

Anonymous — Wed, 07 Feb 2018 17:28:44 GMT

Imadhabash,

I have to click multiple times to select the object..two times to start drawing the pline, two times to select the object..there is no pattern that I can observe...sometimes I can select the objects without any problems.. another time I need to click 2-3 times...

Re: First click doesn't work for line, copy, move

Anonymous — Wed, 07 Feb 2018 22:14:36 GMT

I think I found the solution. Touchpad delay is causing all of these issues. I disabled it and removed software that was blocking the touchpad. Thanks for the help.