topic Re: Creating an arc from tangent of circle to line. in AutoCAD Forum

Creating an arc from tangent of circle to line.

zoltanferenczi99 — Sun, 08 Oct 2017 17:11:46 GMT

I am trying to create a curve that would look like a fillet between an arc that is connected to a line. I need the curve to line up with the tangent of the arc to the line directly so it flows from line to arc. Been messing with many commands to no avail. Posted pictures of what I need it to look like.

Re: Creating an arc from tangent of circle to line.

neaton — Sun, 08 Oct 2017 17:35:29 GMT

Try the Circle, TTR (Tan Tan Radius) command. At the prompt select the line and circle. Once the circle is created use the trim command to remove the unwanted lines.

@zoltanferenczi99 wrote:

I am trying to create a curve that would look like a fillet between an arc that is connected to a line. I need the curve to line up with the tangent of the arc to the line directly so it flows from line to arc. Been messing with many commands to no avail. Posted pictures of what I need it to look like.

Re: Creating an arc from tangent of circle to line.

imadHabash — Sun, 08 Oct 2017 18:39:28 GMT

Hi.

There are many ways to get what you ask for . by TRIM and FILLET you will get it also. a make a simple screencast sample that describe your issue.

Re: Creating an arc from tangent of circle to line.

zoltanferenczi99 — Sun, 08 Oct 2017 19:07:15 GMT

Thank you! Filleting by radius of 0.5 was what I was missing. Tried tan-tan radius as well, both worked nice. Appreciate the help.