topic Re: Remove hatch from internal island in AutoCAD Forum

Remove hatch from internal island

kubastan89 — Thu, 12 Oct 2017 13:27:01 GMT

Hi,

Can you tell my how I can remove the hatch from this internal square from the drawing?

I know that I can create a hatch that will isolate internal island but what if I would like to remove some island from the existing hatch ?

Re: Remove hatch from internal island

beyoungjr — Thu, 12 Oct 2017 13:35:00 GMT

Click on your Hatch to bring up the Hatch ribbon. Click on the icon "Select" in the first Panel. Use a window to select only your internal square/rectangle. Hit Enter. Click "Close Hatch Editor".

Done

Blaine

Re: Remove hatch from internal island

gotphish001 — Thu, 12 Oct 2017 13:36:29 GMT

Click on the hatch. In the hatch ribbon click off the associative button, then on the left off the ribbon pick the select command. Click on the small square polyline that you want to remove the hatch in, hit enter. That should remove it.

Re: Remove hatch from internal island

gotphish001 — Thu, 12 Oct 2017 13:38:36 GMT

Blyoung is correct. You don't need to uncheck the associative box. I thought you did as the first time it didn't work unless I did. I must have missed clicked something as it worked in two subsequent tests.

Re: Remove hatch from internal island

Vinayv4v — Thu, 12 Oct 2017 13:43:17 GMT

Hi,

You can use the remove Boundary option in hatchedit.

Re: Remove hatch from internal island

Anonymous — Sat, 14 Oct 2017 14:40:19 GMT

To remove inside hatch, you can do WIPOUT (WIP) [FOR AFTER HATCH CREATION].

You can use SELECT OBJECT OPTION and PICK INTERNAL POINT option while in hatch creation.

You can also view YouTube video by below link [ ENGLISH VERSION }

https://www.youtube.com/watch?v=di_3QERfkDM&feature=youtu.be

Re: Remove hatch from internal island

Anonymous — Thu, 06 Dec 2018 17:20:13 GMT

Thank you. I tried every single thing with no luck and finally I could do it in a simple step.

Re: Remove hatch from internal island

Anonymous — Tue, 18 Jun 2019 09:20:41 GMT

In AutoCAD 2019 - In the model space

After you have created polylines around the areas that you want to contain a hatch and not contain hatch

Click on the hatch icon in the Draw ribbon
Adjust the settings on the Pattern and Properties panel to your preferences
Click Select in the Boundaries panel and select the outer shape
Click Close Hatch Creation
Type WIPEOUT in the command line and click on Polyline
Select the polyline that you want to erase the hatch from
Click Enter

Re: Remove hatch from internal island

Anonymous — Thu, 29 Jul 2021 20:34:02 GMT

Thank you, you are a saviour!