topic Re: Unable to fillet solid edge in AutoCAD Forum

Unable to fillet solid edge

Anonymous — Wed, 18 Oct 2017 04:41:54 GMT

I designed a simple solid (a table leg) and I was able to fillet two of the four long edges with a radius 15 mm.

AutoCAD does not allow me to fillet the other two edges regardless of the radius I input. I even tried with 1 mm radius just for testing.

I get error 102026.

Is this a bug or I am doing something wrong? In the picture you will see that two of the edges are filleted, I need to fillet the other two edges all along the solid. I have attached the dgw. file.

Thanks for the support,

Felice

Re: Unable to fillet solid edge

parkr4st — Wed, 18 Oct 2017 09:52:08 GMT

attached the dwg. it works no problem. FILLETEDGE and select 9 edges on each of the corners.

dave

Re: Unable to fillet solid edge

john.vellek — Wed, 18 Oct 2017 16:37:28 GMT

Hi @Anonymous,

Unlike @parkr4st, I also had some problems getting the Fillet Edge to work on your model. I had been selecting each portion of the edge individually and received a few different error messages.

However, when I tried again, I used the Chain edge and that seemed to work perfectly.

I have attached a quick video showing this process. I did this exercise in AutoCAD 2016. Which version of AutoCAD are you using?

Please select the Accept as Solution button if my post solves your issue or answers your question.

Re: Unable to fillet solid edge

john.vellek — Thu, 19 Oct 2017 21:41:32 GMT

Hi @Anonymous,

I am checking back to see if my post or @parkr4st's helped you with your problem. Please mark a post or posts as accepted solutions if they resolved the issue or give me a bit more detail on this issue so we can continue to work towards getting this solved.

Please hit the Accept as Solution button if a post or posts solves your issue or answers your question.

Re: Unable to fillet solid edge

Anonymous — Sat, 21 Oct 2017 08:05:27 GMT

Thank you.

The procedure you suggested is working also for me.

Thanks for the hint,

Felice