topic come disegnare Scala disegno 1:100 in AutoCAD Forum

come disegnare Scala disegno 1:100

Anonymous — Thu, 14 Jun 2018 18:30:57 GMT

Buona sera, come dovrei impostare tramite autocad 2016 la scala 1:100 (sia impostazioni sia disegno e relativa stampa)?

Grazie.

Cordiali saluti.

Riccardo

Re: come disegnare Scala disegno 1:100

Anonymous — Thu, 14 Jun 2018 18:45:37 GMT

Please specify your question in English better.

object: how to draw Scale drawing 1: 100

Anonymous — Thu, 14 Jun 2018 19:09:20 GMT

Good evening, how should I set the scale 1: 100 through autocad 2016 (both settings and drawing and related printing)?
Thank you.
Best regards.
Riccardo

Re: object: how to draw Scale drawing 1: 100

john.vellek — Thu, 14 Jun 2018 19:21:13 GMT

Hi @Anonymous,

Do you have a sample file that you can share? I am happy to make a Screencast video to how you can set up scales in your dwg.

Typically, once you set your units by picking the correct template or by using -dwgunits, you then draw at 1:1` in modelspace for your geometry.

Your paperspace layouts are also one to one representations of the output size. If this is the case, plotting should be set at 1:1.

The viewport is where you can set the scale of your drawing relative to the output size. This means if you double-click into a viewport, you can then use the scale list to apply the proper zoom ratio to set the scale for that viewport. With multiple viewports on a layout you can also show many different scales at the same time.

Please select the Accept as Solution button if my post solves your issue or answers your question.

Re: object: how to draw Scale drawing 1: 100

Anonymous — Thu, 14 Jun 2018 19:47:12 GMT

Excuse me mister John, if I draw 1: 1 that is a millimeter is equal to 1 mm (millimeter) through the scale command I bring it 1: 100 right?
Or do I do it during the printing phase?
Would it be kind enough to explain to me step by step, screenshot or video as an example?
Thank you.
Best regards.
Riccardo

Re: object: how to draw Scale drawing 1: 100

john.vellek — Thu, 14 Jun 2018 19:59:09 GMT

Hi @rachrick87,

You do not want to use SCALE as that will actually change the size of the geometry. To change the printed scale you can use the Scale list (as I show in my video) or you can even use Zoom 1/100xp.

I hope my video helps. It show that I draw a line 100mm. Then, I go to paperspace and set a paper size for output. Lastly, I double-click into the viewport and set my view scale. The print scale will remain at 1:1.

Re: object: how to draw Scale drawing 1: 100

john.vellek — Mon, 18 Jun 2018 20:31:41 GMT

Hi @Anonymous,

I am checking back to see if my post helped you with your problem or question. Please mark my post as the solution if it resolved the issue or give me a bit more detail on this issue so we can continue to work towards getting this solved.

Please hit the Accept as Solution button if a post or posts solves your issue or answers your question.