topic Re: AUTOCAD HATCH 10' X 4' RUNNING stretcher bond in AutoCAD Forum

AUTOCAD HATCH 10' X 4' RUNNING stretcher bond

Anonymous — Tue, 26 Jun 2018 14:42:15 GMT

Hi ALL,

I NEED TO CREATE A HATCH JUST LIKE THE AR-B816 DEFAULT BUT WITH DIFFERENT dimensions

i need 10' x 4' elevation

please help??

i attached a picture for the pattern that i want

Re: AUTOCAD HATCH 10' X 4' RUNNING stretcher bond

Patchy — Tue, 26 Jun 2018 14:49:45 GMT

Open the acad.pat

copy the 8x16 pattern and make a 4x10 or 48x120

Re: AUTOCAD HATCH 10' X 4' RUNNING stretcher bond

Anonymous — Tue, 26 Jun 2018 15:08:10 GMT

i tried but i didn't work for me...

so this is the

*AR-B816, 8x16 Block elevation stretcher bond
0, 0,0, 0,8
90, 0,0, 8,8,

can you do it for me?

Re: AUTOCAD HATCH 10' X 4' RUNNING stretcher bond

Patchy — Tue, 26 Jun 2018 15:10:33 GMT

Re: AUTOCAD HATCH 10' X 4' RUNNING stretcher bond

john.vellek — Tue, 26 Jun 2018 15:18:32 GMT

Hi @Anonymous,

This should give you a 4x10 pattern. If you are working in inches and have units set to Architectural, you will need to scale this up by a factor of 12.

*4x10, 4x10 Block elevation stretcher bond
0, 0,0, 0,10
90, 0,0, 4,4

Please select the Accept as Solution button if my post solves your issue or answers your question.

Re: AUTOCAD HATCH 10' X 4' RUNNING stretcher bond

Patchy — Tue, 26 Jun 2018 15:18:59 GMT

After adding new pattern, exit autocad and restart to see new pattern.

Re: AUTOCAD HATCH 10' X 4' RUNNING stretcher bond

Anonymous — Tue, 26 Jun 2018 15:19:32 GMT

i did what you post and i got it stacked ?

Re: AUTOCAD HATCH 10' X 4' RUNNING stretcher bond

Anonymous — Tue, 26 Jun 2018 15:25:16 GMT

hi,

ok am getting the right dimension but it stacked?

not running ??

Re: AUTOCAD HATCH 10' X 4' RUNNING stretcher bond

john.vellek — Tue, 26 Jun 2018 15:26:20 GMT

Hi @Anonymous,

Yes, I apologize but I missed that. I am about to run into a meeting but will come back to this shortly for you.

Please select the Accept as Solution button if my post solves your issue or answers your question.

Re: AUTOCAD HATCH 10' X 4' RUNNING stretcher bond

Anonymous — Tue, 26 Jun 2018 15:28:39 GMT

i got it stacked like this pic! but i need it running? like the first pic i posted

Re: AUTOCAD HATCH 10' X 4' RUNNING stretcher bond

Patchy — Tue, 26 Jun 2018 15:36:11 GMT

My bad,

*AR-BRSTD1, Standard brick elevation stretcher bond
0, 0,0, 0,48
90, 0,0, 48,60, 48,-48

Re: AUTOCAD HATCH 10' X 4' RUNNING stretcher bond

Kent1Cooper — Tue, 26 Jun 2018 15:39:26 GMT

@Anonymous wrote:

....

*AR-B816, 8x16 Block elevation stretcher bond
0, 0,0, 0,8
90, 0,0, 8,8,

....

You left out the 8,-8 at the end of that second line....

Try this, if your drawing unit is a foot:

0, 0,0 0,4

90, 0,0, 4,5, 4,-4

Or, if it's an inch:

0, 0,0 0,48

90, 0,0, 48,60, 48,-48

[In the latter case, you could also use the first definition at a scale factor of 12.]

Re: AUTOCAD HATCH 10' X 4' RUNNING stretcher bond

Anonymous — Tue, 26 Jun 2018 19:18:25 GMT

ITS NOT WORKING

Re: AUTOCAD HATCH 10' X 4' RUNNING stretcher bond

Anonymous — Tue, 26 Jun 2018 19:19:12 GMT

ITS NOT WORKING 😞

Re: AUTOCAD HATCH 10' X 4' RUNNING stretcher bond

john.vellek — Tue, 26 Jun 2018 19:30:04 GMT

Hi @Anonymous,

Try this and let me know if you are having continued difficulties in getting it to work.

Please select the Accept as Solution button if my post solves your issue or answers your question.

Re: AUTOCAD HATCH 10' X 4' RUNNING stretcher bond

Patchy — Tue, 26 Jun 2018 19:35:14 GMT

I tested and it works

Re: AUTOCAD HATCH 10' X 4' RUNNING stretcher bond

Anonymous — Tue, 26 Jun 2018 20:10:42 GMT

thank you... 🙂

it works

Re: AUTOCAD HATCH 10' X 4' RUNNING stretcher bond

Anonymous — Tue, 26 Jun 2018 20:11:20 GMT

thank you..

it works 🙂

Re: AUTOCAD HATCH 10' X 4' RUNNING stretcher bond

Kent1Cooper — Wed, 27 Jun 2018 13:01:05 GMT

@Anonymous wrote:

ITS NOT WORKING

"Not working" isn't really enough information -- does it draw something but look wrong? does it not come up as an available pattern? does trying to use it result in some kind of error message? etc. Just to consider some possible reasons [since the content of several proposed definitions is identical to what did work]....

It needs to have a pattern name line [call it what you like, but format the content in the correct way]. And it needs to be either added into the ACAD.pat file or it needs to be saved to a file with a .pat filetype ending, with only the one definition in the file, and with the file name preceding that ending identical to the pattern name. A mismatch there is a common mistake. Another common mistake is to add it to the end of ACAD.pat but to not have an empty line at the end of the file [i.e. the file must end with an Enter, not with the last character of the last pattern definition].

Re: AUTOCAD HATCH 10' X 4' RUNNING stretcher bond

Anonymous — Wed, 27 Jun 2018 13:11:26 GMT

hi,
sorry i was at work so my answers were very short,
don't worry the guys here solved the problem!
thanks for your help 🙂