topic Re: All Autodesk products will not recognize GPU in AutoCAD Forum

All Autodesk products will not recognize GPU

ptitleman — Tue, 14 May 2024 11:46:37 GMT

I mainly use Plant3d 2024 right now. When I booted up Monday morning, the software was no longer recognizing the GPU, so hardware acceleration was turned off, and was grayed out. I then opened regular AutoCAD 2024, and it had the same problem. I then downloaded Plant3d 2025, which also had the same problem. Everything in the pc seems to show the GPU is working. We made sure all the drivers were updated. I also did google it and tried everything out there to reset it, to no avail.

Any recommendations would be greatly appreciated. Thank you!!

Re: All Autodesk products will not recognize GPU

Valentin_CAD — Tue, 14 May 2024 12:22:15 GMT

@ptitleman ,

See if this helps:

Hardware acceleration cannot be enabled in AutoCAD products (autodesk.com)

Re: All Autodesk products will not recognize GPU

paullimapa — Tue, 14 May 2024 12:55:59 GMT

@ptitleman Try this possible solution

Re: All Autodesk products will not recognize GPU

ptitleman — Tue, 14 May 2024 12:55:19 GMT

yes, that was the main list I found. We went through all of that, but nothing fixed it.

Re: All Autodesk products will not recognize GPU

ptitleman — Tue, 14 May 2024 12:56:09 GMT

Thank you, that link did not work though.

Re: All Autodesk products will not recognize GPU

paullimapa — Tue, 14 May 2024 12:56:45 GMT

I updated it. Try again

Re: All Autodesk products will not recognize GPU

ptitleman — Tue, 14 May 2024 13:14:20 GMT

Thank you. We did find that page yesterday as well, and we tried those with our IT service.

This is the only part we did not try, as we could not find this option when right-clicking on autocad

Right-click on the Autodesk software and choose Run with graphics processor > Change default graphics processor...
Alternatively:
1. Right-click the desktop and choose NVIDIA Control Panel.
2. Click Manage 3D settings on the left and then click the Program Settings tab.

Re: All Autodesk products will not recognize GPU

pendean — Tue, 14 May 2024 14:45:14 GMT

@ptitleman wrote:
Thank you. We did find that page yesterday as well, and we tried those with our IT service.

This is the only part we did not try, as we could not find this option when right-clicking on autocad
Right-click on the Autodesk software and choose Run with graphics processor > Change default graphics processor...
Alternatively:
Right-click the desktop and choose NVIDIA Control Panel.
Click Manage 3D settings on the left and then click the Program Settings tab.

Here is how to open a support case with Autodesk if you are on subscription to seek out Autodesk Support's help:
https://www.autodesk.com/support/technical/article/caas/sfdcarticles/sfdcarticles/How-to-find-my-support-cases-with-Autodesk-Technical-Support.html?_ga=2.143218544.457179972.1687356981-993279110.1686949184