topic How to reset (left/right) Mtext Justification after Mirroring floor plan in AutoCAD Forum

How to reset (left/right) Mtext Justification after Mirroring floor plan

daveshepherd — Wed, 15 May 2024 18:40:14 GMT

Hi All,

I just mirrored a floor plan and the Mtext had been set to the left justification. when I mirrored the floor plan the Mtext

is still set to the left. My question is: Is there a command that will allow you to highlight all the left justification Mext and change to the Right Justification. Maybe some sort of filter command?

Thanks,

Dave Shepherd

Northern California

Re: How to reset (left/right) Mtext Justification after Mirroring floor plan

atGK8NU — Wed, 15 May 2024 18:55:07 GMT

Use the QSELECT command, and filter with the Justify property.

Re: How to reset (left/right) Mtext Justification after Mirroring floor plan

daveshepherd — Wed, 15 May 2024 19:29:00 GMT

Thanks for the quick response, but unfortunately, I tried that command
early but it didn't work

Re: How to reset (left/right) Mtext Justification after Mirroring floor plan

pendean — Wed, 15 May 2024 19:44:56 GMT

Is that really a floating Mtext 'scooched' next to a floating leader?

If it's an MLEADER instead, you can try fixing it like this manually

Or permanently fixing your MLEADERSTYLE settings forever in all of your files including this one like this:

HTH

Re: How to reset (left/right) Mtext Justification after Mirroring floor plan

atGK8NU — Wed, 15 May 2024 20:09:30 GMT

If it is indeed multileaders in your drawing, that would explain why QSELECT didn't work for you... Multileader needs to be specified as the object type.

If not, please share your drawing if possible.