topic Re: TORIENT COMMAND NOT WORKING in AutoCAD Forum

TORIENT COMMAND NOT WORKING

Anonymous — Tue, 29 Jan 2019 19:09:24 GMT

AutoCAD 2019 is giving me this message whenever I try to use the TORIENT command:

Command: TORIENT
(*pop-error-mode*) underflow.
Cannot invoke (command) from *error* without prior call to (*push-error-using-command*).
Converting (command) calls to (command-s) is recommended.

What should I do?

Re: TORIENT COMMAND NOT WORKING

MMcCall402 — Wed, 30 Jan 2019 04:41:27 GMT

Yea, this happens sometimes. Save the drawing, exit AutoCAD and reopen. Something goes wonky and you need to close up shop and reopen fresh.

Re: TORIENT COMMAND NOT WORKING

Anonymous — Mon, 04 Feb 2019 13:45:02 GMT

Thank you! That worked!

Re: TORIENT COMMAND NOT WORKING

jayhar — Fri, 08 Feb 2019 04:04:14 GMT

Hi,

your same post here https://forums.autodesk.com/t5/autocad-forum/torient-command-not-working/m-p/8559071#M966023

you need to check any error in autocad, this time its solve again and again it repeat because your error already shown

(*pop-error-mode*) underflow.
Cannot invoke (command) from *error* without prior call to (*push-error-using-command*).
Converting (command) calls to (command-s) is recommended.

Also you didn't give replay in this post

first confirm no error in AutoCAD.

Thanks & Regards,

JAYHAR.M.J

Detailing Engineer

CICON Rebar Solutions Pvt. Ltd.

DD Trade Tower, Kaloor-Kadavanthara Road,

Kaloor, Ernakulam, Kerala,India - 682017

E-mail : jayharcicon@gmail.com Mob : +91-9961032444

AutoCAD Certified Professional

Issued by Autodesk