topic Viewport Zoom All function in AutoCAD Forum

Viewport Zoom All function

acclarkJR2TJ — Fri, 19 Jul 2024 12:48:36 GMT

Good morning all.

Working with a couple of drawings this morning and when I do a Zoom All in Drawing1 paper space viewport, it will zoom to my object in model space.

But when I do a Zoom All in Drawing2 paper space viewport, the same object is off in space.

The viewports aren't locked in either drawing, and I don't recall a zoom setting that would keep the object in Drawing2 from maximizing.

Thoughts?

Re: Viewport Zoom All function

cadffm — Fri, 19 Jul 2024 13:02:06 GMT

Hi,

"But when I do a Zoom All in Drawing2 paper space viewport, the same object is off in space"

Isn't it the same when zoom-all in MODEL tab?

No?

Please test it with a new viewport in another (new) Layout.

Yes, the same in model tab.

It is not the only object by chance, search for other object (miles away from it).

OR it is a view setting issue.

Share a screenshot of command _VIEW dialog, or better and if possible , share your drawing file.

Re: Viewport Zoom All function

acclarkJR2TJ — Fri, 19 Jul 2024 13:32:02 GMT

"But when I do a Zoom All in Drawing2 paper space viewport, the same object is off in space"

Isn't it the same when zoom-all in MODEL tab?

When I do a zoom all in model space, it zooms correctly.

No?

Please test it with a new viewport in another (new) Layout.

If I put in a new viewport, the zoom all works correctly.

Yes, the same in model tab.

It is not the only object by chance, search for other object (miles away from it).

OR it is a view setting issue.

Share a screenshot of command _VIEW dialog, or better and if possible , share your drawing file.

I looked at _VIEW, but didn't see anything abnormal.

Sorry, I'll have to add more details later.

Re: Viewport Zoom All function

pendean — Fri, 19 Jul 2024 13:43:42 GMT

@acclarkJR2TJ wrote:
...Please test it with a new viewport in another (new) Layout.
If I put in a new viewport, the zoom all works correctly....

You found your fix: replacing the offending viewport it is. Your "drawing2" is corrupt OR there is something else in there for the "...the same object is off in space..." effect to take place.

Re: Viewport Zoom All function

cadffm — Fri, 19 Jul 2024 13:43:43 GMT

@acclarkJR2TJ wrote:

Share a screenshot of command _VIEW dialog, or better and if possible , share your drawing file.

I looked at _VIEW, but didn't see anything abnormal.

You checked the the _VIEW dialog while inside the problem-viewport?

and the camera is set to 0,0,0 from 0,0,1 ?

Sorry, I'll have to add more details later.

Do it, all files (.dwg), screenshots, are welcome.