topic Betreff: Scale problem with BricsCAD X AutoCAD in AutoCAD Forum

Scale problem with BricsCAD X AutoCAD

alfinmuharrram97 — Tue, 20 Aug 2024 13:46:33 GMT

Hey everyone. I have a little problem here and really need your help. I have a couple drawing in BricsCAD with original scale (1:1). On the other hand, I have a same drawing in AutoCAD with original scale (1:1). The problem is, I try to copy the AutoCAD drawing to the BricsCAD but, the scale is not 1:1. However, the scale become small in BricsCAD. Hope you guys can guide me with this problem. Thanks in advance. in BricsCADin AutoCAD

Betreff: Scale problem with BricsCAD X AutoCAD

cadffm — Tue, 20 Aug 2024 13:56:45 GMT

Hi,

1. Make sure it is the same size.

Use command DIST to measure a length in both

Do you think they are drawn in same units?

2. Does it works the opposite way, from BCAD to ACAD?

If so, check your BCAD InsunitsScaling setting

Betreff: Scale problem with BricsCAD X AutoCAD

alfinmuharrram97 — Tue, 20 Aug 2024 14:04:19 GMT

Thank you for your reply. I've already check it and I'm 100% sure it has the same size with both drawing. If I use this "InsunitsScaling" command, what should i do next?

Betreff: Scale problem with BricsCAD X AutoCAD

cadffm — Tue, 20 Aug 2024 14:15:25 GMT

@alfinmuharrram97 schrieb:
what should i do next?

So the opposite way works, from BCAD to ACAD?

Okay,

if you are not familiar with a feature/command/sysvar, learn more about it, press [F1]

But this help is a bit confused, so remember the current value (1 ?) and try to use value 0 (means off)

Betreff: Scale problem with BricsCAD X AutoCAD

cadffm — Tue, 20 Aug 2024 14:34:03 GMT

You are talking about clipboard action (ctrl+c/ctrl+v), or?

If not, tell us your way " try to copy "

and draw in line with length = 1 in Acad

how long is it after pasting in Bcad?

Re: Scale problem with BricsCAD X AutoCAD

pendean — Tue, 20 Aug 2024 14:44:12 GMT

Re: Scale problem with BricsCAD X AutoCAD

paullimapa — Tue, 20 Aug 2024 17:15:58 GMT

What if you xref the Briscad dwg into Autocad? Does the scale look right then?

Re: Scale problem with BricsCAD X AutoCAD

Valentin_CAD — Tue, 20 Aug 2024 17:45:48 GMT

@alfinmuharrram97 ,

@alfinmuharrram97 wrote:
... The problem is, I try to copy the AutoCAD drawing to the BricsCAD but, the scale is not 1:1.

Might want to consider these links:

Copy /paste wrong scale — BricsCAD Forum (bricsys.com)

How to Change Units In BricsCAD - Bricsys Blog

BricsCAD Forum (bricsys.com)

Re: Scale problem with BricsCAD X AutoCAD

alfinmuharrram97 — Wed, 21 Aug 2024 12:02:41 GMT

This method looks good. I tried it and it works. thanks...