topic Re: problem with polyline in AutoCAD Forum

problem with polyline

Anonymous — Thu, 19 Mar 2020 18:32:57 GMT

it doesn't let me draw a line like " 1.20". If a press point it enters somewhere else, I don't know how to explain it because it's the first time happening to me and I can't find anything about it. Please help

Re: problem with polyline

Patchy — Thu, 19 Mar 2020 19:05:14 GMT

Th drawing is upside down, try negative number.

Re: problem with polyline

Kent1Cooper — Thu, 19 Mar 2020 19:43:49 GMT

To me, that image looks like you typed in 1,20 rather than 1.20. When you type X,Y input, it moves over from the X slot into the Y slot when you type the comma.

Re: problem with polyline

pendean — Thu, 19 Mar 2020 20:15:10 GMT

Your UCS is rotate: but is your PLAN set to your current UCS too?

Re: problem with polyline

Anonymous — Sun, 29 Mar 2020 09:13:12 GMT

yes, my drawing match the UCS. My plan is set to my current UCS

Re: problem with polyline

Anonymous — Sun, 29 Mar 2020 09:14:41 GMT

nope, I used "." and it doesn't work

Re: problem with polyline

Anonymous — Sun, 29 Mar 2020 09:15:39 GMT

i tried negative numbers too... doesn't work either

Re: problem with polyline

Alfred.NESWADBA — Sun, 29 Mar 2020 09:26:42 GMT

Hi,

>> it doesn't let me draw a line like " 1.20"

Do you mean a segment with 1.20 length? If so look to your command line and use option to _LENGTH

- alfred -

Re: problem with polyline

Anonymous — Sun, 29 Mar 2020 10:36:17 GMT

if I put a "." in between 1 and 20 for example ( 1 "." 20 ) it locks the "1". And I can't draw a line with length 1.20 for exameple because after a write 1 and then a put the "." it get locked

And now it all resolved by it self....I don't know how..but yeah. Now I can draw a line with the length 1.20 or 1.30 and so on