topic Problem with move, strecht, extrude command in AutoCAD Forum

Problem with move, strecht, extrude command

Anonymous — Mon, 06 Apr 2020 08:45:46 GMT

Hi everyone,

I have bought a new computer, and installed autocad 2019. I'm having big issues with all the commands involving a move. basically it looks like the items are attracted by an other point in the drawing, so I can't move them properly or strecth etc.... I have attached a video of the screen. I also installed 2021 version, and I 'm having the same issue.

Re: Problem with move, strecht, extrude command

imadHabash — Mon, 06 Apr 2020 09:01:11 GMT

Hi,

Q: does this happened if you start a new empty CAD dwg and just MOVE and STRETCH a line ?

if it's OK ... please attache here your CAD dwg ( with the problem ) for testing ?

Re: Problem with move, strecht, extrude command

Anonymous — Mon, 06 Apr 2020 09:08:54 GMT

Hi,

It does it with any file, even with a new drawing. I join you a little video of what it does just after 2 minutes I'm working in the new drawing.

It doesn't do it all the time, so this lead me to believe it is a bug from windows more then autocad.

Re: Problem with move, strecht, extrude command

parkr4st — Mon, 06 Apr 2020 09:18:07 GMT

turn off all snaps to eliminate the possibility that is causing the problem. grid, object, etc. the snaps are on in your settings.

Re: Problem with move, strecht, extrude command

imadHabash — Mon, 06 Apr 2020 09:21:52 GMT

would you try this please :

try another mouse , any changes ?
dock your command line ( not floating ) .

Re: Problem with move, strecht, extrude command

Anonymous — Mon, 06 Apr 2020 09:23:22 GMT

Thanks for your help but it still not working. have a look at the video.

Re: Problem with move, strecht, extrude command

imadHabash — Mon, 06 Apr 2020 09:28:16 GMT

i notice from your previous attachments that your Hardware acceleration icon is turning OFF/on automatically !!!

is that real ... ? you may need to check your drivers ?

Re: Problem with move, strecht, extrude command

Anonymous — Mon, 06 Apr 2020 09:36:48 GMT

Hi,

I have changed the mouse and it is not longer causing problem. I will work a bit with it then I will accept the sollution if I see this was the issue

Re: Problem with move, strecht, extrude command

imadHabash — Mon, 06 Apr 2020 09:38:34 GMT

Great ... waiting for confirming the issue .

All the best ...

Re: Problem with move, strecht, extrude command

Alfred.NESWADBA — Mon, 06 Apr 2020 09:38:37 GMT

Hi,

can you please type in the command as shown here:

_.MOVE<ENTER>

...are you now asked for objects and than for basepoint?

You might have a tool which overrides the _MOVE command (or the M shortcut, if defined?).

- alfred -

Re: Problem with move, strecht, extrude command

Anonymous — Mon, 06 Apr 2020 09:38:44 GMT

I m not sure but my Nvidia graphic driver is up to date. Is it an other driver involved with the hardware accelarator?

Re: Problem with move, strecht, extrude command

Anonymous — Mon, 06 Apr 2020 09:44:00 GMT

Hello,

I had this problem with all the command with a deplacment, move stretch
extrude.

Now I have changed the mouse and it looks like it is working again. Many
thanks for your help