topic Re: USERR1 variable display in AutoCAD Forum

USERR1 variable display

info — Tue, 21 Apr 2020 19:20:41 GMT

Using Rtext, is there a way to display the value assigned to the USERR1 variable as a 3 place decimal?

Re: USERR1 variable display

cheryl.buck — Tue, 21 Apr 2020 19:46:04 GMT

Great question. There does not appear to be a way to do this directly from the RTEXT command, text formatting appear to be limited to style, height, and rotation.

There may be a way to do this using DIESEL, the members of the AutoCAD Customization Forum would be a great resource for how to do this.

If a post was helpful, Likes are always welcome.

Please click the Accept Solution button for any posts that resolve the issue or answer your question.

All the best,

[This post has been edited for clarity by cheryl.buck]

Re: USERR1 variable display

info — Tue, 21 Apr 2020 19:58:32 GMT

Thank you, Do I need to repost this to the other forum?

Re: USERR1 variable display

Kent1Cooper — Tue, 21 Apr 2020 20:10:18 GMT

Yes [to the question of whether it can be done -- no, you don't need to post to the Customization Forum].

RTEXT command, Diesel option, put in:

$(rtos, $(getvar, userr1), 2, 3)

The setting of your DIMZIN System Variable will determine whether leading and/or trailing zeros are displayed. If you change the value, the displayed value can be updated with REGEN.

Re: USERR1 variable display

info — Tue, 21 Apr 2020 20:04:45 GMT

Thank you, that did it.

Re: USERR1 variable display

cheryl.buck — Tue, 21 Apr 2020 20:07:37 GMT

Hi @info,

Thank you for letting the community know that the info helped. Thank you @Kent1Cooper!

All the best,