https://forums.autodesk.com/t5/autocad-electrical-forum/plc-module-adding-or-removing-spaces-breaks/m-p/3672300#M46961 <P>You can use the Stretch PLC Module command to add or remove spacing. This command is on the Schematic tab &gt; Edit Components panel under the Scoot flyout. There is also a Split PLC to add breaks later. You cannot put a module back together again once a break has been added though.&nbsp;</P> Wed, 24 Oct 2012 15:25:46 GMT PatMurnen_Adsk 2012-10-24T15:25:46Z https://forums.autodesk.com/t5/autocad-electrical-forum/plc-module-adding-or-removing-spaces-breaks/m-p/3670898#M46960 <P>Hi,...</P><P>&nbsp;</P><P>Once I have placed a PLC Module from the default catalog (not a custom job), and have inserted it with various spaces and/or breaks.... is there any way to edit this to add more spaces or remove unwanted spaces?&nbsp; Would a simple "block edit" be the way to go?</P><P>&nbsp;</P><P>&nbsp;</P> Tue, 23 Oct 2012 17:30:49 GMT https://forums.autodesk.com/t5/autocad-electrical-forum/plc-module-adding-or-removing-spaces-breaks/m-p/3670898#M46960 cbenner 2012-10-23T17:30:49Z https://forums.autodesk.com/t5/autocad-electrical-forum/plc-module-adding-or-removing-spaces-breaks/m-p/3672300#M46961 <P>You can use the Stretch PLC Module command to add or remove spacing. This command is on the Schematic tab &gt; Edit Components panel under the Scoot flyout. There is also a Split PLC to add breaks later. You cannot put a module back together again once a break has been added though.&nbsp;</P> Wed, 24 Oct 2012 15:25:46 GMT https://forums.autodesk.com/t5/autocad-electrical-forum/plc-module-adding-or-removing-spaces-breaks/m-p/3672300#M46961 PatMurnen_Adsk 2012-10-24T15:25:46Z https://forums.autodesk.com/t5/autocad-electrical-forum/plc-module-adding-or-removing-spaces-breaks/m-p/3672342#M46962 <P>Thanks, that's good to know.</P> Wed, 24 Oct 2012 15:42:13 GMT https://forums.autodesk.com/t5/autocad-electrical-forum/plc-module-adding-or-removing-spaces-breaks/m-p/3672342#M46962 cbenner 2012-10-24T15:42:13Z