topic Another Reports: Terminal Plan issue in AutoCAD Electrical Forum

Another Reports: Terminal Plan issue

rickstarosto4361 — Fri, 25 Oct 2024 14:59:05 GMT

Why when running a “Report” or “Table Generator” for Terminal Plan why does the output indicate 2 wires on terminals? Is there some way in ACADE to show only 1 wire number? as in bottom screen shot.?

Also, is it possible to have jumpers shown here in “Report”

(Reports output)

(Table Generator output)

REF is not an Available Field to report, is this something that can be added?

This is our present way of a terminal list.

Re: Another Reports: Terminal Plan issue

rhesusminus — Fri, 25 Oct 2024 23:09:52 GMT

Without using the "enormous flexibility" of AcadE, i.e. to program a custom solution, you can't get what you want.

Re: Another Reports: Terminal Plan issue

rickstarosto4361 — Mon, 28 Oct 2024 10:53:14 GMT

so there is no easy way to add REF to Table Generator output?

Re: Another Reports: Terminal Plan issue

rhesusminus — Mon, 28 Oct 2024 14:33:40 GMT

You would think that such an important field should be part of what you can choose, right?

No, there's no easy way to do this.

And people still ask me why I stopped believing in AutoCAD Electrical...

Re: Another Reports: Terminal Plan issue

rickstarosto4361 — Mon, 28 Oct 2024 15:20:18 GMT

that SUBMIT IDEA tab is pretty much useless. I made a mistake pushing for Autocad Electrical. they make it look so good on YouTube and other webinars, etc...

If I were Smart, I'd write me a book AUTOCAD ELECTRICAL for DUMMIES.😜