topic Re: Can't change round in Alias Forum

Can't change round

Anonymous — Sat, 21 Oct 2017 22:45:08 GMT

Hi!

I can't seem to change the rounds on my edges. I click on the edge, and when I enter the round it doesn't change. It has worked before, and on the same object. I had around 4 edges left to trim and then it got stuck on 1 and then changed to 3,899 or something. It's the battery lid I want to trim, and I tried restarting the program and the computer, even opening another file. A few times this worked, but most of the time it's like the program doesn't even react to what I enter. I want a pretty low number, because 1-3 doesn't work on all edges.

What am I doing wrong?

Thanks in advance,

Kate

Re: Can't change round

joe.doyle.yyz — Mon, 23 Oct 2017 19:27:38 GMT

Hi Kate,

Any chance you could share the battery lid file? Also, which version of Alias are you using?

Regards,

Joe

Re: Can't change round

Anonymous — Fri, 27 Oct 2017 12:25:08 GMT

Hi Joe!

I couldn't upload the wire-file, so I sent an image. I'm using alias 2018. Here's a zip 🙂

Regards,

Kate

Re: Can't change round

bob55 — Fri, 27 Oct 2017 13:58:08 GMT

This zip file has a wire file of a remote control in it. Is that what you intended?

Re: Can't change round

Anonymous — Fri, 27 Oct 2017 14:04:23 GMT

yes :), the lid is on the bottom and is called "Batterilock"

Re: Can't change round

joe.doyle.yyz — Fri, 27 Oct 2017 14:06:48 GMT

Hi Kate,

Thanks for sharing. I have asked one of our QA team members to look at this issue and see if he can help. Stay tuned!

Joe

Re: Can't change round

bob55 — Fri, 27 Oct 2017 14:34:20 GMT

Could you tell me the object name of a I could play with to duplicate the issue?

Re: Can't change round

michael_wu — Mon, 30 Oct 2017 08:36:45 GMT

Hi katerina, I have checked that the width of the extrude surface on the Batterilock is only 0.3mm. That's why the radius of fillet surface larger than 0.3 doesnot work between the two surfaces. If you decrease the radius, you should get the expected output. Please refer the images below.