topic Re: Folding plate between 2 "Angle identical" problem in Advance Steel Forum

Folding plate between 2 "Angle identical" problem

spufut — Fri, 26 May 2023 05:01:51 GMT

Hi! I need to connect 2 "Angle identical" with a folded plate. I ve managed to do it until this one. I attached some photos and the dwg so if you have any ideas how to solve this problem would be great.

Thank you!

Re: Folding plate between 2 "Angle identical" problem

AleckGiles — Wed, 14 Jun 2023 07:52:55 GMT

Hi,

I don't really see much wrong with the fold you have. You have folded the plates together. If you are concerned about the tab showing at the end of the fold it is because the two plates are not perfectly level. There is a 0.0033mm difference in hieght of the edges. Folds always only cover the mating edge not any extra length.

Re: Folding plate between 2 "Angle identical" problem

bigcarl5000kg — Wed, 14 Jun 2023 11:37:09 GMT

@spufut,

if I recreate the polylines / bend plate, it works nice: