topic Re: Create Elevation View in model in Advance Steel Forum

Create Elevation View in model

Anonymous — Wed, 17 May 2017 02:47:18 GMT

Dear All,

How to create any elevation view in the model by grid or line, and in this view can show Grid same as my picture below, when I active my view it is not show my grid and level?

Thanks All

Re: Create Elevation View in model

Anonymous — Wed, 17 May 2017 15:20:30 GMT

HI,

Anyone please help me!

Thanks

Re: Create Elevation View in model

FCort — Wed, 17 May 2017 16:46:09 GMT

Grid in elevation views no possible in model space. Just in drawings.

Re: Create Elevation View in model

Anonymous — Sat, 20 May 2017 02:24:13 GMT

HI,

When I want model 2D frame If I can not see my grid in elevation, how to modeling my structure in elevation view?

Thanks

Re: Create Elevation View in model

chrisengg — Mon, 22 May 2017 11:16:33 GMT

you can use Project explorer for different grids and elevations if you want

Re: Create Elevation View in model

arkli2009 — Mon, 22 May 2017 21:52:24 GMT

I believe "3D Grid Line" is the only reasonable solution of this. Let's all close our eyes and make a wish.

Re: Create Elevation View in model

FCort — Mon, 22 May 2017 22:18:15 GMT

Guys, the best way to be implemented is voting up for the idea .

https://forums.autodesk.com/t5/advance-steel-ideas/3d-grids/idi-p/7090434

Re: Create Elevation View in model

arkli2009 — Tue, 23 May 2017 01:52:21 GMT

Everybody please go vote!!!

Re: Create Elevation View in model

AleckGiles — Wed, 24 May 2017 10:27:20 GMT

Hi,

You can set your UCS vertical and draw a grid on a vertical plane. Then you will see this in the elevation view.

Re: Create Elevation View in model

Anonymous — Tue, 30 May 2017 04:39:56 GMT

HI sir, We dont want same Grid label in elevation view. We want to view Elevation level (El.+000) in Gridline elevation view in model space. Please refer snap. we want to see same as in Model space. Regards, Anwar

Re: Create Elevation View in model

shrinal_bhatt — Sun, 13 Oct 2024 20:44:47 GMT

Hi Anwar,
I couldn't find any command in Advance Steel showing Elevation level Grids likewise in E3D or S3D. Let me know if you have got any resolution to your question.
Thanks.

Re: Create Elevation View in model

willianSWEAV — Fri, 18 Oct 2024 12:36:01 GMT

Hello. You can create the grids vertically as indicated by @AleckGiles and name them according to their elevations. Create one grid for each elevation and edit the name of the grid, within the grid properties, with the elevation information, so you will have what you desire. It's an alternative method, but it should work."