https://forums.autodesk.com/t5/advance-steel-forum/stair-base-stringer-connection/m-p/8445432#M38076 Check the ucs position in the model, I expect the stringer start is below wcs. I think if you move the ucs to the start of the stringer you should be able to create the connection. Tue, 04 Dec 2018 22:10:43 GMT johnjmbennett 2018-12-04T22:10:43Z https://forums.autodesk.com/t5/advance-steel-forum/stair-base-stringer-connection/m-p/8445232#M38075 <P>Advance Steel 2019</P> <P>Please see the attached video clip. I am not sure why I can't add a connection at the base of the stringer. Strange results. Please also see the image of what results I need.&nbsp; Thank you!</P> Tue, 04 Dec 2018 20:48:24 GMT https://forums.autodesk.com/t5/advance-steel-forum/stair-base-stringer-connection/m-p/8445232#M38075 advandes 2018-12-04T20:48:24Z https://forums.autodesk.com/t5/advance-steel-forum/stair-base-stringer-connection/m-p/8445432#M38076 Check the ucs position in the model, I expect the stringer start is below wcs. I think if you move the ucs to the start of the stringer you should be able to create the connection. Tue, 04 Dec 2018 22:10:43 GMT https://forums.autodesk.com/t5/advance-steel-forum/stair-base-stringer-connection/m-p/8445432#M38076 johnjmbennett 2018-12-04T22:10:43Z https://forums.autodesk.com/t5/advance-steel-forum/stair-base-stringer-connection/m-p/8446716#M38077 <P>Thanks John!! That was the issue...</P> Wed, 05 Dec 2018 13:40:28 GMT https://forums.autodesk.com/t5/advance-steel-forum/stair-base-stringer-connection/m-p/8446716#M38077 advandes 2018-12-05T13:40:28Z