tema Re: how to extrude the thickness of a 3D object en AutoCAD for Mac Forum

how to extrude the thickness of a 3D object

Anonymous — Thu, 15 Oct 2020 00:32:52 GMT

how to extend the thickness of a 3D object?

I only used the extrude for a 2D object into 3D, but do not know how to extrude a 3D object. I mean to make a plate thicker for example as attached file.

Re: how to extrude the thickness of a 3D object

Anonymous — Thu, 15 Oct 2020 03:28:31 GMT

can anyone help me on this?

Modify -> 3D operations??

Re: how to extrude the thickness of a 3D object

maxim_k — Thu, 15 Oct 2020 08:15:51 GMT

Welcome to Autodesk Forums!

Hi @Anonymous

Although I don't see "yellow plate" in the drawing you attached, I recreated it, well maybe something similar.

You can use Subobject selection technique to edit, move in your case, upper face of the plate.

Set UCS to World.

Press and hold Crtl key ob keyboard and click on upper face of the plate, you will see red dot - Subobject grip.

Now select this grip and move your mouse up, from keyboard entry distance - 2.7 and hit Return:

Upper face move 2.7 units up and you get 5.7 thickness (3.0+2.7=5.7)

For reference look >>>>here<<<<

Re: how to extrude the thickness of a 3D object

Anonymous — Thu, 15 Oct 2020 19:56:22 GMT

The red dot extrude worked well!

Thanks !

Re: how to extrude the thickness of a 3D object

Anonymous — Fri, 16 Oct 2020 03:15:26 GMT

Hi Maxim,

One more question:

On the white frame on the left side, there is an o-ring groove on the top surface. How to select these "subtracted" surface, and delete this o-ring groove? Thanks~

Re: how to extrude the thickness of a 3D object

maxim_k — Fri, 16 Oct 2020 05:01:18 GMT

Switch to "Shaded with edges" Visual Style for better visibility.

Set Subobject Selection Filter to Face:

Now pick on groove bottom surface to select it:

Now look for "red dot" grip in the center of the groove, select it and adjust face position using object snap to 3D Vertex here:

See the result in attachment