tema Re: Can only see partial drawing in workspace en AutoCAD for Mac Forum

Can only see partial drawing in workspace

Anonymous — Mon, 27 Nov 2017 23:15:34 GMT

Using Autocad for Mac 2011. In scale 1:1 using mm as units of measurements I create a rectangle 500mm long x 1000 mm wide. Half of the drawing appears in and the other half, outside the workspace. When I try to zoom out to view it it does not allow as if it has reached a maximum zoom.

Re: Can only see partial drawing in workspace

maxim_k — Tue, 28 Nov 2017 07:20:01 GMT

Welcome to Autodesk Forums!

Hi,

Try to use ZOOM command with Extents option.
You can also use REGEN command when you reach maximum zoom level.

Maxim

Re: Can only see partial drawing in workspace

Anonymous — Tue, 28 Nov 2017 08:14:40 GMT

The other thing you can do when starting a new drawing is set the drawing limits which can be found in the menu 'Format/Drawing Limits'

I was always taught to do this by my AutoCAD teacher when I first started out, although I never use it anymore. It basically sets up a drawing area in the form of a rectangle to the size of your choice. So for example if I was going to open a new drawing for the purpose of drawing a house floorpan, I may choose to make the drawing limits 20000,20000 which will give me a drawing area of 20m x 20m. You would do this before you start drawing.

You don't need to do the above, I just thought it may be worth knowing if you are quite new to using AutoCAD. As always there is often more than one solution for every question.

Re: Can only see partial drawing in workspace

pendean — Tue, 28 Nov 2017 14:00:50 GMT

Show us: post your DWG file.

Re: Can only see partial drawing in workspace

Anonymous — Tue, 28 Nov 2017 21:36:41 GMT

Thank you! Works now.

Re: Can only see partial drawing in workspace

Anonymous — Tue, 28 Nov 2017 21:37:19 GMT

Very helpful. Thank you.