tema Re: Lines and hatches problems in PDF and printing en AutoCAD for Mac Forum

Lines and hatches problems in PDF and printing

Anonymous — Sat, 07 Jan 2017 12:07:35 GMT

Hi,

I use Autocad for Mac and recently I have found an unexpected problem in my files: I edit the layout with my drawings for creating PDF and printing (I use file .ctb, 300 dpi, Adobe PDF printer), but in the pdf file and in the printed paper the lines are crooked and the solid hatches don't follow the geometric forms (small triangles beyond the lines). In the model the lines and the hatches are good, but in the layout viewport I don't visualize in the right way. I have tried several scales and lineweights, but I have the same problem.

I attach one Cad file and pdf.

Someone have suggestions or solutions?

Thank you in advance

Re: Lines and hatches problems in PDF and printing

maxim_k — Sun, 08 Jan 2017 09:24:05 GMT

Welcome to Autodesk Forums!

Hi,

You forgot to share ProvaStandard_500.ctb plot style table file which you are using in Page Setup for layout in this drawing.

Maxim

Re: Lines and hatches problems in PDF and printing

Anonymous — Sun, 08 Jan 2017 10:06:27 GMT

Right!

It is in the Zip folder. But I have the same problem also with other files .ctb, like monochrome.ctb for example.

Thank you!

Ale

Re: Lines and hatches problems in PDF and printing

maxim_k — Sun, 08 Jan 2017 20:31:48 GMT

Hi Ale,

What do you think about this (see attached)?

Does this PDF suit your needs?

Maxim

Re: Lines and hatches problems in PDF and printing

Anonymous — Sun, 08 Jan 2017 20:41:09 GMT

Hi Maxim,

The PDF seems much better! there are still some small hatches outside the forms, but the lines are good...

how have you done it?

Thank you,

Ale

Re: Lines and hatches problems in PDF and printing

maxim_k — Sun, 08 Jan 2017 20:53:12 GMT

Ale,

The problem you have already have been discussed here on the Forum several times.

I cannot find all topics now, but here is one of them:

https://forums.autodesk.com/t5/autocad-for-mac-forum/strange-lines-and-joins-in-pdf-export/m-p/4349800#M8410

Look for the answer in #2 of my post there.

The problem is that you are trying to fit large objects on a small piece of paper. In order to achieve this you need to downscale them strongly, as the result AtoCAD cannot handle such resolution in PDF output.

Maxim

Re: Lines and hatches problems in PDF and printing

Anonymous — Wed, 18 Jan 2017 12:41:52 GMT

Thank you for the solution to problem!

Ale