modelling this tent

surrealismo — Thu, 30 Aug 2018 16:50:52 GMT

hello,

could someone help me out on start modelling this tent?

thank you!

Re: modelling this tent

AdrianWise8371 — Thu, 30 Aug 2018 20:09:18 GMT

Hi, that looks fairly straight forward, its got eight sides, so start with a cylinder and give it eight sides...

the default is five height segments , leave it at that and then i'd go with a taper modifier and then an FFD modifier and get the bulge.

Edit poly time, select the pointy section at a polygon level, detach them and then use extrude to extend the edges then move them to the ground plane, insert the polys to add some geometry, select the new faces and the bottom face on each side and delete, scale the edge end to get the pointed tales...

Take a quick look here...

https://autode.sk/2NydKzL

That should get you somewhere close as a starter

Re: modelling this tent

surrealismo — Thu, 30 Aug 2018 20:21:08 GMT

Hi adrian, many thanks for taking your time to help me! much appreciated

topic Re: modelling this tent in 3ds Max Modeling Forum

modelling this tent

Re: modelling this tent

Re: modelling this tent