topic Re: "coCreateInstance() failed" error when skin modifier applied in 3ds Max Forum

"coCreateInstance() failed" error when skin modifier applied

steve — Fri, 21 May 2010 20:14:57 GMT

I have a mesh that I applied a skin modifier onto it.

coCreateInstance() failed
Please check your registry entries
CLSID{F088EA74-2E87-11D3-BIF3-00C0F03C37D3} and make sure you are logged in as an administrator.

I am logged in as an administrator.

3DS Max 2011 Design 32 bit.

Re: "coCreateInstance() failed" error when skin modifier applied

Steve_Curley — Fri, 21 May 2010 20:44:05 GMT

Try running it logged in as the Administrator. Not all admins are equal...

Re: "coCreateInstance() failed" error when skin modifier applied

Anonymous — Sat, 12 Jun 2010 15:21:48 GMT

Same problem here.

Max 2011
win xp pro sp3 32 bit.

Created an admin password, ran max as admin, applied skin modifier to mesh for use with biped. Error dialogues and the cocreatinstance () error. Clicked yes. Can apply modifier but it refuses to work.

There are no other admin options as far as I know and I have 2011 on a 64bit at home where everything runs just fine (better than fine actually). Researching this shows most folks are successful with firing up max and applying the modifier as admin once fixes the problem. Not my problem though. I think this is a 32 bit thing and as the report rate is low I am guessing my case is a bit unique.

Any help appreciated.

Re: "coCreateInstance() failed" error when skin modifier applied

Anonymous — Tue, 27 Jul 2010 16:07:22 GMT

I ran into the same problem. Did anyone ever figure out a solution to this?

Re: "coCreateInstance() failed" error when skin modifier applied

Anonymous — Wed, 29 Sep 2010 18:22:48 GMT

I also ran into the same problem, and I was wondering if anyone could help. I'm sort of stuck because I'm logged in as the adminstrator, but I still get this message.

Re: "coCreateInstance() failed" error when skin modifier applied

Anonymous — Fri, 29 Oct 2010 04:50:05 GMT

I have suddenly run into the same problem. Max 2011. My skin was working a couple of weeks ago, and now when i appy the skin modifier to a new model, a simple model, it bugs out a little bit and gives me the CoCreateInstance() failed message. Doesn't really work once i hit ok though. Not sure what is up, but i need to have my skin working. I am the administrator, and logged in as so....Please any information anyone would have to this would be great.

Re: "coCreateInstance() failed" error when skin modifier applied

Anonymous — Sat, 30 Oct 2010 14:56:12 GMT

Hello to all and sorry for my English.

Same thing was on my machine winxp32+3dsmax2011 when i want to create CAT object.
To fix problem i type «regsvr32.exe "C:\Program Files\Autodesk\3ds Max Design 2011\MAXComponents.dll"» in command line (win->run...).
Restart 3dsmax.
Hope it would be useful.

Re: "coCreateInstance() failed" error when skin modifier applied

Anonymous — Thu, 25 Nov 2010 16:21:53 GMT

its realy help. thanks!!!!!

Re: "coCreateInstance() failed" error when skin modifier applied

Anonymous — Mon, 29 Nov 2010 02:05:02 GMT

Hello to all and sorry for my English.

Same thing was on my machine winxp32+3dsmax2011 when i want to create CAT object.
To fix problem i type «regsvr32.exe "C:\Program Files\Autodesk\3ds Max Design 2011\MAXComponents.dll"» in command line (win->run...).
Restart 3dsmax.
Hope it would be useful.

I was having the same problem as well... 3ds max 2011.

I created an account so I could post here and tell you thank you, this worked perfectly!

Cheers!
Chris

Re: "coCreateInstance() failed" error when skin modifier applied

Anonymous — Mon, 29 Nov 2010 19:10:23 GMT

Forgive my English, I'm from Spain, I have problems with "CoCreateInstance () failed" error when to skin modifier Applied, place a solution but I can not understand, command line (win-> run ...). Could you explain it better thanks

Re: "coCreateInstance() failed" error when skin modifier applied

Steve_Curley — Mon, 29 Nov 2010 19:39:45 GMT

Start (button) > Run

Or open a Command Prompt (probably on Start > Programs > Accessories)

In either case, enter the command as described above then press Enter.

Re: "coCreateInstance() failed" error when skin modifier applied

Anonymous — Mon, 29 Nov 2010 19:50:51 GMT

Start -> Run, also you can press "win+r" on keybord to open command line.

Re: "coCreateInstance() failed" error when skin modifier applied

Anonymous — Fri, 14 Jan 2011 14:40:03 GMT

Hello,
I was having the exact same problem.
The solution went from the creation of an account to enter in windows.
Previously, I was using the by default administrator account the use windows.
I created my own account, restarted the computer to reboot windows and the message didn't appear again.
Many thanks to your messages, which putted me on the way.
Have a nice day 🙂
Pierre.

Re: "coCreateInstance() failed" error when skin modifier applied

Anonymous — Tue, 01 Mar 2011 20:59:21 GMT

With Max off

1. Windows Button+R to open Run window
2. type> regsvr32.exe
3. open an explorer window and navigate to your installed directory (ie. C:\Program Files\Autodesk\3ds Max2011)
4. Drag MaxComponents.dll into the run window after your text "regsvr32.exe" and then hit enter.
5. Start Max

Re: "coCreateInstance() failed" error when skin modifier applied

Anonymous — Thu, 31 Mar 2011 18:27:45 GMT

Just ran into this problem again with 3dsmax 2009.
The last time it happened the fix above worked for me. (regsrv32)
But today it didn't, when I hit enter, I got another error.

So I downloaded and installed the latest hotfix and that has seemed to
fix the issue.

http://usa.autodesk.com/adsk/servlet/ps/dl/item?siteID=123112&id=15302236&linkID=9241178

Re: "coCreateInstance() failed" error when skin modifier applied

Anonymous — Tue, 07 Jun 2011 23:09:27 GMT

Thankyou so much man! I have been struggling with this problem for ages. I hope something really great happens to you because you just made my day! 😄

Re: "coCreateInstance() failed" error when skin modifier applied

Anonymous — Wed, 12 Oct 2011 12:37:40 GMT

I created an account here just to thank u all for the solution

Re: "coCreateInstance() failed" error when skin modifier applied

Anonymous — Thu, 01 Dec 2011 01:09:56 GMT

hay all

im having the same problem now as you have had with skin modifier in max 2012. the same admin error appears when file is opening and skin is no longer effects by bone translation, rotations.
tried the regsvr32.exe fix... but doesnt fix 😕 sometimes adding the skin modifier effects a mesh but the character is to the left of the rig... out of his bones. very strange

any help please 🙂

kev

Re: "coCreateInstance() failed" error when skin modifier applied

Anonymous — Tue, 07 Feb 2012 07:26:02 GMT

I would like to give a big thank you to Eicronie for sharing on how to fix this scary issue. You are my hero.
I got this issue by removing old versions of Max on my system.
Jack

Re: "coCreateInstance() failed" error when skin modifier applied

Anonymous — Tue, 07 Feb 2012 08:34:25 GMT

Thanks )