Garment Maker Seams

ganderson — Thu, 19 May 2016 00:12:19 GMT

I am using Garment Maker to drape patterns on a scanned body. Sometimes when I apply Garment Maker, it isn't until I am ready to apply the seams that I realize that I didn't put a necessary spline break for a seam. Is it possible to edit the spline and put in a break without deleting all the work that I have done in Garment Maker and starting over?

That would be a real help.

Thank you,

~Giovonnae

Re: Garment Maker Seams

irishman_team_kilber — Thu, 20 Oct 2016 00:25:10 GMT

Giovonnae

you could run a connet through the mesh and then see if that does the jobs, you may know this but hey select the mesh and in the edges select both sides of the mesh and in edit edges hit the connect option box and this will allow you to add the number of connects through your mesh. you can also connect option box you can pinch and side then connect where you want them.

If that does not help then sorry you may need to remodel your clothing again!

Best of luck

topic Re: Garment Maker Seams in 3ds Max Forum

Garment Maker Seams

Re: Garment Maker Seams