https://forums.autodesk.com/t5/3ds-max-animation-and-rigging/cloth-modifier-from-inventor-import/m-p/8008933#M5731 <P>So, what I'm trying to do is use a cloth modifier on an object I've imported from Inventor (as a SAT file). But when I simulate it, the object falls apart into all its surfaces like I've used an explode command on it. I do not want this to happen.</P><P>&nbsp;</P><P>The object comes in as an editable body object, and it shows 0 Open Edges and 1 Element, so I'm not really sure what's going on. I tried to do a weld all on it, but since there are 0 Open Edges, obviously that didn't work.</P><P>&nbsp;</P><P>Any and all help is appreciated.</P> Thu, 17 May 2018 13:50:18 GMT Anonymous 2018-05-17T13:50:18Z https://forums.autodesk.com/t5/3ds-max-animation-and-rigging/cloth-modifier-from-inventor-import/m-p/8008933#M5731 <P>So, what I'm trying to do is use a cloth modifier on an object I've imported from Inventor (as a SAT file). But when I simulate it, the object falls apart into all its surfaces like I've used an explode command on it. I do not want this to happen.</P><P>&nbsp;</P><P>The object comes in as an editable body object, and it shows 0 Open Edges and 1 Element, so I'm not really sure what's going on. I tried to do a weld all on it, but since there are 0 Open Edges, obviously that didn't work.</P><P>&nbsp;</P><P>Any and all help is appreciated.</P> Thu, 17 May 2018 13:50:18 GMT https://forums.autodesk.com/t5/3ds-max-animation-and-rigging/cloth-modifier-from-inventor-import/m-p/8008933#M5731 Anonymous 2018-05-17T13:50:18Z